Re: [pfSense Support] Issue installing 0.71.12 ISO to HD

[Kyle Mott]

I've tried 0.72, and that panics at 50% also. I'll probably try an older version and then upgrade when I get home today, but Id really like to try the newer version(s). I also seem to be having an issue when I go to restore my config, I always get a weird 'execve' error for my WAN DHCLIENT config. I havent been able to track it down, but I'll keep working on it. -Kyle Mott analyzerx wrote: try installing a older version and upgrading (0.6.X seem to be working fine) also try the new version i think there are some changes for this bug/thing On 8/1/05, Kyle Mott <[EMAIL PROTECTED] > wrote: I'm getting the same exact error, every time I try to install the 0.71.12 ISO. I had to revert back to m0n0wall (hopefully temporarily). -Kyle Mott Scott Ullrich wrote: >Does this happen every time you attempt an install or did you only try once? > >Scot > > >On 7/30/05, Wesley Joyce <[EMAIL PROTECTED]> wrote: > > >> >> >> >>The exact error I am getting installing 0.71.12 to HD is as follows.  After >>doing all the partitioning and selecting of file systems, at >> >> >> >>50% of the '/FreeSBIE/usr/local/bin/cpdup …' command being executed I get a >> >> >> >>Panic: vm_fault: fault on nofault entry: c780400 >> >>Cupid = 0 >> >>Uptime 1m38s >> >>Dumping 126mb (2 chunks) >> >>            Chunk 0: 1mb (159 pages) … ok >> >>            Chunk 1: 126MB (32174 pages) 110 94 78 62 46 30 14 … ok >> >> >> >>Dump complete >> >>…snip… >> >> >> >> ________________________________ >> >> >>Wesley Joyce, Network Administrator >> Network Operations, Information Technology Services >> University of the Virgin Islands >> #2 John Brewers Bay, St. Thomas, USVI 00802-9990 >> (340) 693-1469 (voice) / (340) 693-1545 (fax) >> http://www.uvi.edu/ >> >> >> >> >> >> >> >> ________________________________ >> >> >>From: Wesley Joyce [mailto:[EMAIL PROTECTED]] >> Sent: Saturday, July 30, 2005 1:37 PM >> To: 'analyzerx'; support@pfsense.com >> Subject: RE: [pfSense Support] Pre 0.7x ISO >> >> >> >>Thanks. >> >> >> >>I have tried to install pfSense-LiveCD-0.71.12 , pfSense-LiveCD-0.716, >>pfSense-LiveCD-0.70.10 and pfSense-LiveCD-0.70.4 ISO's to hard drive using >>the 'installer' and they all either dump during the copy of files to the >>partition, or after rebooting from the hard drive the 1st time, it complains >>about the hard drive and files not being found.  I previously got the 0.6x >>series to install. >> >> >> >>Is it supports installing 0.6x and upgrading to the latest 0.71? >> >> >> >> ________________________________ >> >> >>Wesley Joyce, Network Administrator >> Network Operations, Information Technology Services >> University of the Virgin Islands >> #2 John Brewers Bay, St. Thomas, USVI 00802-9990 >> (340) 693-1469 (voice) / (340) 693-1545 (fax) >> http://www.uvi.edu/ >> >> >> >> >> >> >> >> ________________________________ >> >> >>From: analyzerx [mailto: [EMAIL PROTECTED]] >> Sent: Saturday, July 30, 2005 1:27 PM >> To: support@pfsense.com >> Subject: Re: [pfSense Support] Pre 0.7x ISO >> >> >> >>What seems to be the problem with the installation? >> >> I'm uploading it to my web server in any case, it will take some time cause >>I only have 128kbps upload... o_O >> I'll post the URL once it's done... >> >> --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]