The embedded images do not have VGA :) Install from the ISO to the DoC.
Scott On 8/3/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hi all, > > I'm trying to get pfSense working on my EPIA setup with the > following configuration: > > * EPIA PD10000 (C3 1Ghz "Nehemiah", dual LAN connection, Mini-ITX) > * 512MB DDR SDRAM (KingMax) > * PQI DiskOnModule (256MB Capacity) > * Morex Procase/Cubid 2677 Mini-ITX case with 60W PSU > * Intel i82559 NIC (PCI card) > > I used this image => pfSense-Embedded-0.73-megs.bin.gz > (Dated : 04-Aug-2005 00:31, 28.2MB) > > And used Manuel Kasper's "physdiskwrite" tool to write the image > onto the 256MB DOM in Win2k Pro SP4. > > That was OK, until when I tried to boot with it... > > The following is what appears : > > > > FreeBSD/i386 bootstrap loader, Revision 1.1 > ([EMAIL PROTECTED], Sun Jul 31 22:20:50 UTC 2005) > Loading /boot/defaults/loader.conf > /boot/kernel/kernel text=0x523f93 data=0x7f48c+0x43c20 \ > \ > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > /boot/kernel/acpi.ko text=0x409fc data=0x2060+0x1090 > syms=[0x4+0x7680+0x4+0x9ddd] > \ > > > At this point, it just hangs. > > I previously used the same system for M0n0Wall ver 1.1, and it worked fine. > I currently have two Cable ISP connections which I want to use pfSense on. > (consolidate two routers into one with pfSense's multi-WAN capability). > > Can anyone help or explain what the above means? > > Regards > -Stmok > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
