I am testing 73.6 on soekirs, using serial console I get this output
(the same hw works great with pfsense 71.12 configured as secondary with
carp):
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #0: Wed Aug 3 20:29:47 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/pfSense_wrap.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.69-MHz
586-class CPU)
Origin = "Geode by NSC" Id = 0x540 Stepping = 0
Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory = 134217728 (128 MB)
avail memory = 121917440 (116 MB)
wlan: mac acl policy registered
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0000000-0xa0000fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c3:5d:a0
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0001000-0xa0001fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c3:5d:a1
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem
0xa0002000-0xa0002fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c3:5d:a2
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pci1: <PCI bus> on pcib1
sis3: <NatSemi DP8381[56] 10/100BaseTX> port 0xd000-0xd0ff mem
0xa4000000-0xa4000fff irq 5 at device 0.0 on pci1
sis3: Silicon Revision: DP83816A
miibus3: <MII bus> on sis3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis3: Ethernet address: 00:00:24:c3:47:98
sis4: <NatSemi DP8381[56] 10/100BaseTX> port 0xd100-0xd1ff mem
0xa4001000-0xa4001fff irq 11 at device 1.0 on pci1
sis4: Silicon Revision: DP83816A
miibus4: <MII bus> on sis4
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis4: Ethernet address: 00:00:24:c3:47:99
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0
on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11
at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 991MB <PRCF1002 CF YUAN1026> at ata0-master UDMA33
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=2031103
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=2031116
ad0: FAILURE - READ_DMA timed out LBA=0
ad0: FAILURE - READ_DMA timed out LBA=2031119
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=2031057
ATA PseudoRAID loaded
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=0
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=1
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=1
ad0: FAILURE - READ_DMA timed out LBA=1
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=0
ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0
ad0: TIMEOUT - READ_DMA retrying (0 retries left) LBA=0
ad0: FAILURE - READ_DMA timed out LBA=0
Trying to mount root from ufs:/dev/ad0a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
regards
Rodolfo
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
