Hi Holger, I could not have multiwan work here. Tryed with OPT1 and OPT2 for wan, can you have some example of configuration?
Thanks Moacyr ----- Original Message ----- From: "Holger Bauer" <[EMAIL PROTECTED]> To: <support@pfsense.com>; <[EMAIL PROTECTED]> Sent: Tuesday, August 23, 2005 9:15 AM Subject: AW: [pfSense Support] Upgrade from m0n0 to pfSense? Hi, first: pfSense isn't able to do 2 pppoe at the moment. A workaround is to use a router in front of the second wan of the pfsense and set the pfsense's second wan ip as dmz in this router. second: if you want to use loadbalancing I have to disappoint you too. It needs some work still but should be implemented soon. multiwan however works (sending out traffic type a via wan1 and type b via wan2). third: I think nobody has tested uploading a pfsense-image to the m0n0 webgui. It might be possible if you raise the php-upload-size of the m0n0 first to accept the larger image and if you have enough room to upload it. there will be a much smaller cf-image with one of the next versions, so you might just want to wait for that. Holger -----Ursprüngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 23. August 2005 11:52 An: support@pfsense.com Betreff: [pfSense Support] Upgrade from m0n0 to pfSense? Hi, is it possible to upgrade from a CF-Card Version of m0n0wall to pfSense? pfSense seems to be more reasonable to me, due to need of two PPPoE Connections... Regards, Tim --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
