Here's my setup: I have a low-end dell PC with 3 interfaces. I have a
Proxim VLAN-capable 802.11g AP. VLAN 1 on the AP is the privileged
LAN I use my laptop on and connects to the same 10.0.0.0/24 subnet my
FreeBSD server uses. The 3rd NIC is on the 10.1.1.0/24 subnet, which
is VLAN 2 on the AP. I use an 8-port SMC VLAN capable switch. I had
gotten annoyed at needing 3 NICs with my old firewall SW (gnatbox)
and they don't yet support VLAN, so I decided to try pfsense. First
I got it working with 3 interfaces and then last night I decided to
try converting to native VLAN, so I did this:
created vlan0 as vlan #1 on fxp0
created vlan1 as vlan #2 on fpx0
interface assignment of LAN => vlan0
interface assignment of OPT1 => vlan1
Had a couple of glitches, but it works. Here's the problem
though: just upgraded to 0.79.4 and the console said something about
mismatches and started up the interface assignment code, so I had to
re-enter the interface assignment (but didn't need to re-enter the
VLANs). Is this going to happen anytime I reboot? Any ideas?
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
