I have soekirs 4501 with 0.80.4 and I was trying outoing load balancing.
I've read the wiki document and I can get it work atm. I just have done a quick test to try it, will try to do a better one when I have more time. Actually I tryed: Lan on eth0 with ip 192.168.1.1 Linux client on lan with ip 192.168.1.10 and gateway 192.168.1.1 Wan on eth1 with ip 192.168.50.199 On wan I've two adsl routers conected to a switch. Ip for adsl1 is 192.168.50.240 and ip for adsl2 is 192.168.50.80 I go to sevices and create the load balancer pool. At this point I've a question about ip monitor, it needs to be an internet ip? the adsl router ip? I add the 2 adsl gateways ip to the pool. Probably at this point there is a bug in 0.80.4 when you try to edit an outgoing load balancer pool. You click on edit and you dont get all the info from the pool, just the name, description and type of pool, but the list is empty. After I go to nat and enable advanced outbound nat. And then change the firewall rule to the new gateway pool. When i try to see if it works, i do a traceroute to google and it goes to the first adsl router (192.168.50.80) but if I unplug the adsl router It doesnt change to the other router. So the question, it can be done on this way or I need to make two wan adapters and put the router on diferent ethernet? Thanks for the help --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
