using the same gateway for both wans won't work as you can't specify rules for this I think. the rules are applied to a gateway and with both gateways the same... :-/ you might have to come up with a workaround like having a nated router in front of one connection to use this as gateway on one wan and put the pfsense in the dmz of this router.
Holger -----Ursprüngliche Nachricht----- Von: Dave Warren [mailto:[EMAIL PROTECTED] Gesendet: Montag, 5. September 2005 22:54 An: Scott Ullrich Cc: [email protected] Betreff: Re: [pfSense Support] Multiple WANs Scott Ullrich wrote: >On 9/5/05, Dave Warren <[EMAIL PROTECTED]> wrote: > > >>Quick question -- I'm looking at pfSense, and wondering if it's possible >>to use two WAN interfaces which receive their IPs via DHCP, and also if >>it's a problem if they share default gateways? >> >>Long story short, I have two connections to the same ISP and would like to >>direct some traffic to one, and some traffic to the other. Can I do this? >> >> > >Yes, DHCP on multi-wan is supported. > Cool, that helps. Any idea whether or not having the same (DHCP-assigned) "default" gateway IP on multiple WAN interfaces will cause a problem? In other words, my reading so far suggests that routing is done based on the destination gateway, not the interface, although that may not be entirely correct. Sorry if it's a dumb question, I'm just trying to get things planned out before I rewire to handle the net configuration -- Unfortunately my managed switch can't cope with the same MAC address on multiple physical ports even if it's different VLANs, so this change requires physical rewiring, I can't just reconfigure my switch :( -- It's not an optical illusion. It just looks like one. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
