issue a ifconfig from option 8 shell in the form of: ifconfig ath0 (if its a ath card) ifconfig wi0 (if its a non ath card)
Also, there will be a file in /tmp/ which was used to initialize the card, please provide its contents. It will be named something like ifconfig_wireless_$interface Scott On 9/6/05, Alejandro Galue <[EMAIL PROTECTED]> wrote: > > Hello, > > The stationname on wireless interface is empty ... > > Any other tip ? > > Thanks, > Alejandro. > > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Tuesday, September 06, 2005 2:00 PM > To: Alejandro Galue > Cc: [email protected] > Subject: Re: [pfSense Support] Wireless Access Problem > > If you have stationname filled out, remove it. > > On 9/6/05, Alejandro Galue <[EMAIL PROTECTED]> wrote: > > > > Hello All, > > > > I'm using pfSense-Embedded-82.4.bin on a Soekris net4801 with a > > miniPCI Wireless Card. > > > > I configure de wireless interface to work as an access point and > > configure dhcp server for this interface. > > > > I used the same configuration to do the same with m0n0wall 1.2b9, and > > it works fine. But with pfsense, when I try to connect a laptop with > > WinXP SP2 I reach the wireless network fine, but it can't get an ip > address. > > > > Any suggestions ? > > > > Thanks, > > Alejandro. > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > > commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
