What do you do actually when you "if I go from accessing the internet to accessing my server on the LAN, then try to access the internet again, the connection drops."
Please provide the steps your taking. Something is killing of the netgraph interface for PPPoE and this is not normal behavior. On 9/6/05, Nelson Papel <[EMAIL PROTECTED]> wrote: > I have 4 interfaces setup (WAN, LAN, DMZ, WIFI) and everything is fine when > I'm on any interface except my laptop on the WIFI network, with the WIFI > interface, if I go from accessing the internet to accessing my server on the > LAN, then try to access the internet again, the connection drops. When I go > to the interfaces screen, the WAN status is down. PPPoE is up though, with > the disconnect button next to it, although no MAC or IP address are shown. > Above the WAN interface table it says 'ifconfig: interface ng0 does not > exist'. The NIC is fine, I even changed it out for an identical card. The > link light on both the card and DSL modem are on as well. If I restart the > firewall it's fine until I do the same thing on my laptop again. > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
