Quite the weird problem. Will look into it. Scott
On 9/12/05, Frimmel, Ivan (ISS South Africa) <[EMAIL PROTECTED]> wrote: > Also seems to do it fairly consistently with a USB mouse attached. ( its > attached to a KVM switch so I was compelled to connect it ;) ... ) > > Regards, > > Ivan Frimmel. > HP South Africa - Sales Specialist, Industry Standard Servers > Mobile: +27 83 409 2077 > Direct: +27 11 785 1052 > E-Mail and MSN Messenger: [EMAIL PROTECTED] > > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: 11 September 2005 06:01 PM > To: [email protected] > Subject: Re: [pfSense Support] Hang at the end of bootup > > This happens on USB keyboards for some reason. If you can, use a PC > keyboard. > > Scott > > On 9/10/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > > > > > I'm working on install version 0.82.4 / 0.84 and seem to be having > some > > troubles. I have gotten it to work fine under vmware though now that > I'm > > trying to move it to a real machine it doesn't seem to like it. > > > > > > > > Essentially after the LiveCD boots and I do my entire interface > > configuration it comes to the end with "Bootup complete" and then > hangs. > > > > > > > > During the initial load there are few error messages that I can see: > > > > > > > > This repeats several times: > > > > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 > error=4<ABORTED> > > > > > > > > A few lines before the option to setup interfaces I get: > > > > mount: /: unknown special file or file system > > > > No Swap on CDROM > > > > > > > > After configuring the interfaces there is a line: > > > > kbdcontrol: cannot open /dev/ukbd0: Device Busy > > > > > > > > This and reading some posts in the list made me think the CDROM could > be the > > problem, I moved it to the secondary ide and changed the cable, also > > reburned the cd at 4x. > > > > I set my dhcp server to statically give out ip to see if I could ssh > into it > > but I still could not get it after it hangs. > > > > > > > > System specs > > > > CPU: Celeron 2.6Ghz > > > > Board: Asus P4P800-MX (All hardware except for NIC is disabled, IDE > mode is > > set to compatible) > > > > Memory: 512Meg > > > > CDROM: LG GCE-8526B > > > > HD: WD160GB > > > > Mouse Keyboard are USB (Gyration) > > > > > > > > If anyone knows anything else I could try that would be great as I'd > like to > > start testing it on a real box. > > > > Wish I could post more output but I have to way to copy it out only > retyping > > L > > > > > > > > Thanks > > > > John Cianfarani > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
