One thing you might want to double check as well is that the "Block Private Networks" button is not checked under Interfaces -> Wan right at the bottom.
John -----Original Message----- From: Jeroen Geusebroek [mailto:[EMAIL PROTECTED] Sent: Saturday, September 17, 2005 11:47 AM To: [email protected] Subject: [pfSense Support] Access ADSL modem on WAN port Hi, I have an DSL modem with a web interface from which i can get the status etc. It only reacts to an IP adres in the same subnet (10.0.0.0/24). Pfsense gets an IP using DHCP, but it is in a different range then the DSL modem (while being on the same interface). Is it possible to have 2 IP's on the WAN side? Dhcp & Static 10.0.0.0/24? I've tried using virtual ip addresses but that doesn't seem to work, unless i'm doing something wrong. The ideal situation would be to have 2 ip addresses and tell outbound NAT to use IP adress X for 10.0.0.0/24 and IP address Y for the rest of the internet. Is this possible with pfsense? -- Jeroen --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
