I have the same mPCI card. Yes, as Scott said you can reduce the TX (Transmission) power in the webgui, under " interfaces" when you "assign" a new one (says OPT1) you can tune the TX power from 0 to 99 %. As you probably already know this card reach 400mW at 6Mb of transmission (read spec ). I do not see why to buy a 400mW card and reduce to half the power....Anyway it works fine.
Cheers
Giorgio
On 9/20/05, Michiel de Jager <[EMAIL PROTECTED]> wrote:
So if i buy this one:
http://www.mini-box.com/s.nl/sc.8/category.19/it.A/id.386/.f
i would be able to reduce the TX power to around 200mwatt?
And is this done in a webinterface or do i need to do some 'dirty'
handwork?
greetz,
Michiel de Jager
On Mon, 2005-09-19 at 14:03 -0400, Scott Ullrich wrote:
> TX Power? Yes.
>
> Scott
>
>
> On 9/19/05, Michiel de Jager <[EMAIL PROTECTED]> wrote:
> > Hello all,
> >
> > A little question: is the output power of a minipci wireless card
> > (Atheros) controllable in pfsense?
> >
> >
> > Greetz,
> > Michiel de Jager
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
