Holger Bauer wrote:
After reboot (third), carp interface goes up (as backup).
The interface is a wan interface, but I have a router in front of it and
not a modem
Take care that this was an upgrade from 84.6 (working nicely) to 85.2
Now primary is a 84.6, secondary is 85.2
regards
Rodolfo
Just a question (and maybe something I've overread in your original mail). You
have pppoe on WAN. Is your CARP-Interface for WAN or for LAN? pppoe and dchp
interfaces won't work together with CARP. You need at least 3 static IPs on WAN
for this to work (1 for the master, 1 for the backup and 1 that can be shared).
If your CARP IP is for LAN please post your LAN-settings of both boxes and your
CARP-Interface config. Also make sure you have allowed the communication on the
sync-interfaces so the machines can talk to each other.
You also might look at the carp-tutorial, maybe you find something that's quite
obvious by looking at it:
http://pfsense.com/mirror.php?section=tutorials/carp/carp-cluster-new.htm
Holger
-----Ursprüngliche Nachricht-----
Von: Rodolfo Vardelli [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 26. September 2005 09:52
An: support@pfsense.com
Betreff: [pfSense Support] wrap 85.2
Just some more info:
cpu usage stay at 100% (it's the backup firewall), here is top output:
last pid: 81653; load averages: 1.61, 1.50, 1.36 up 0+00:59:28
09:47:25
23 processes: 1 running, 22 sleeping
CPU states: 0.7% user, 0.0% nice, 1.4% system, 1.4% interrupt, 96.6%
idle
Mem: 8164K Active, 8056K Inact, 12M Wired, 4K Cache, 11M Buf, 89M Free
Swap:
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
271 root 1 76 0 1292K 860K select 0:01 0.00% syslogd
74788 root 1 76 0 5576K 2608K select 0:01 0.00% sshd
356 _pflogd 1 -58 0 1536K 1176K bpf 0:01 0.00% pflogd
79956 root 1 76 0 2256K 1488K RUN 0:01 0.00% top
357 root 1 -58 0 3656K 1800K bpf 0:01 0.00% tcpdump
1231 root 1 131 0 2868K 1756K select 0:00 0.00% mpd
A carp (carp1) interface stays at init and doesn't go in backup status.
(master is up)
regards
Rodolfo
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
____________
Virus checked by G DATA AntiVirusKit
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
