Sorry, you really need to not skip it. It's part of the installation process.
Scott On 10/3/05, Ksaveras Ðakys <[EMAIL PROTECTED]> wrote: > > Yes, I'm skipping it - only one hdd (and one OS) is on router and I don't > need boot loader > > > > -----Original Message----- > > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > > Sent: Sunday, October 02, 2005 6:06 PM > > To: [email protected] > > Subject: Re: [pfSense Support]BSD Installer log > > > > > > That file is created during the boot loader step. Are you skipping > > it? It works fine here. > > > > Scott > > > > > > On 10/2/05, [EMAIL PROTECTED] > > <[EMAIL PROTECTED]> wrote: > > > BSD Installer started > > > [Sun Oct 2 15:40:40 2005] > > > DFUI connection on tcp:9999 successfully established > > > ,- opened pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > > > < 493506560 > > > `- closed pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > > > `/FreeSBIE/sbin/sysctl -n hw.physmem` returned: 493506560 > > > ,- opened pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > > > < ad0 > > > `- closed pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > > > `/FreeSBIE/sbin/sysctl -n kern.disks` returned: ad0 Surveying Disk: > > > ad0 ... > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/atacontrol list' > > > < ATA channel 0: > > > < Master: ad0 <Transcend 256M/1.1> ATA/ATAPI revision 0 > > > < Slave: no device present > > > < ATA channel 1: > > > < Master: acd0 <LTN526S/YS0N> ATA/ATAPI revision 0 > > > < Slave: no device present > > > < ATA channel 2: > > > < Master: no device present > > > < Slave: no device present > > > < ATA channel 3: > > > < Master: no device present > > > < Slave: no device present > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/atacontrol list' > > > ,- opened pty to '/FreeSBIE/sbin/fdisk -t -I ad0' > > > < ******* Working on device /dev/ad0 ******* > > > < parameters extracted from in-core disklabel are: > > > < cylinders=978 heads=16 sectors/track=32 (512 blks/cyl) > > > < > > > < parameters to be used for BIOS calculations are: > > > < cylinders=978 heads=16 sectors/track=32 (512 blks/cyl) > > > < > > > < Information from DOS bootblock is: > > > < 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > < start 32, size 500704 (244 Meg), flag 80 (active) > > > < beg: cyl 0/ head 1/ sector 1; > > > < end: cyl 977/ head 15/ sector 32 > > > < 2: <UNUSED> > > > < 3: <UNUSED> > > > < 4: <UNUSED> > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/fdisk -t -I ad0' > > > Disk ad0 (ad0): 244.5M: 978/16/32 > > > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > > > < /dev/ad0: 978 cyl 16 hd 32 sec > > > < Part Start Size Type Flags > > > < 1: 32 500704 0xa5 0x80 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > > > Surveying Partition: 1: 32,500704:165/true > > > ,- opened pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > > > [Sun Oct 2 15:40:41 2005] > > > < # /dev/ad0s1: > > > < 8 partitions: > > > < # size offset fstype [fsize bsize bps/cpg] > > > < a: 500704 0 4.2BSD 2048 16384 31296 > > > Surveying Subpartition on ad0s1: a: 0,500704: 4.2BSD > > F=2048, B=16384 > > > < c: 500704 0 unused 0 0 # > > "raw" part, don't edit > > > Surveying Subpartition on ad0s1: c: 0,500704: unused F=0, > > B=0 ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig -l' > > > [Sun Oct 2 15:40:42 2005] > > > < fxp0 plip0 pfsync0 lo0 pflog0 > > > `- closed pty to '/FreeSBIE/sbin/ifconfig -l' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig fxp0' > > > < fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > > > < options=8<VLAN_MTU> > > > < ether 00:0c:f1:e0:7f:f8 > > > < media: Ethernet autoselect (100baseTX <full-duplex>) > > > < status: active > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig fxp0' > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig plip0' > > > < plip0: > > flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig plip0' > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig pfsync0' > > > < pfsync0: flags=0<> mtu 2020 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig pfsync0' > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig lo0' > > > < lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > > < inet 127.0.0.1 netmask 0xffffff00 > > > < inet6 ::1 prefixlen 128 > > > < inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig lo0' > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig pflog0' > > > < pflog0: flags=0<> mtu 33208 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig pflog0' > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > '/usr/local/share/dfuibe_lua/pit//.' skipped, it is a directory > > > '/usr/local/share/dfuibe_lua/pit//..' skipped, it is a directory > > > UINav.Atom 'pre_install_tasks/welcome' was configured as 'ignore' > > > couldn't register UINav atom from file '050_welcome.lua' > > > '100_select_language.lua' skipped, reason: nil > > > registered UINav atom 'pre_install_tasks/configure_console' > > > UINav.Atom 'pre_install_tasks/load_kernel_modules' was > > configured as 'ignore' > > > couldn't register UINav atom from file '400_load_kernel_modules.lua' > > > registered UINav atom 'pre_install_tasks/configure_network' > > > 'main.lua' skipped, it is the currently executing script > > > Flow executing -> pre_install_tasks/configure_console > > (Configure Console) > > > [Sun Oct 2 15:40:45 2005] > > > Flow executing -> pre_install_tasks/configure_network > > (Configure your Network) > > > [Sun Oct 2 15:41:21 2005] > > > ,-<<< Executing `/FreeSBIE/sbin/ifconfig fxp0 10.11.0.240' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/ifconfig fxp0 netmask 255.255.255.0' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/route add default 10.11.0.21' > > > | add net default: gateway 10.11.0.21 > > > `->>> Exit status: 0 > > > ,- opened pty to '/FreeSBIE/sbin/ifconfig fxp0' > > > < fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > > < options=8<VLAN_MTU> > > > < inet 10.11.0.240 netmask 0xffffff00 broadcast 10.11.0.255 > > > < inet6 fe80::20c:f1ff:fee0:7ff8%fxp0 prefixlen 64 > > tentative scopeid 0x1 > > > < ether 00:0c:f1:e0:7f:f8 > > > < media: Ethernet autoselect (100baseTX <full-duplex>) > > > < status: active > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/ifconfig fxp0' > > > [Sun Oct 2 15:41:24 2005] > > > '/usr/local/share/dfuibe_lua//.' skipped, it is a directory > > > '/usr/local/share/dfuibe_lua//..' skipped, it is a directory > > > registered UINav atom 'main/install_os' UINav.Atom > > > 'main/configure_installed_system' was configured as > > 'ignore' couldn't > > > register UINav atom from file '400_configure.lua' UINav.Atom > > > 'main/upgrade_installed_system' was configured as 'ignore' couldn't > > > register UINav atom from file '600_upgrade.lua' UINav.Atom > > > 'main/set_up_netboot' was configured as 'ignore' couldn't register > > > UINav atom from file '800_netboot.lua' registered UINav atom > > > 'main/reboot' '/usr/local/share/dfuibe_lua//conf' skipped, it is a > > > directory '/usr/local/share/dfuibe_lua//configure' skipped, it is a > > > directory '/usr/local/share/dfuibe_lua//install' skipped, it is a > > > directory '/usr/local/share/dfuibe_lua//lib' skipped, it is a > > > directory 'main.lua' skipped, it is the currently executing script > > > '/usr/local/share/dfuibe_lua//netboot' skipped, it is a directory > > > '/usr/local/share/dfuibe_lua//pit' skipped, it is a directory > > > '/usr/local/share/dfuibe_lua//upgrade' skipped, it is a directory > > > [Sun Oct 2 15:41:25 2005] > > > Menu.Item Selected -> main/install_os (Install pfSense) > > > '/usr/local/share/dfuibe_lua/install//.' skipped, it is a directory > > > '/usr/local/share/dfuibe_lua/install//..' skipped, it is a directory > > > UINav.Atom 'main/install/welcome' was configured as 'ignore' > > > couldn't register UINav atom from file '100_welcome.lua' > > > registered UINav atom 'main/install/select_disk' > > > UINav.Atom 'main/install/format_disk' was configured as 'ignore' > > > couldn't register UINav atom from file '220_format_disk.lua' > > > registered UINav atom 'main/install/partition_disk' > > > registered UINav atom 'main/install/install_bootblocks' > > > registered UINav atom 'main/install/select_part' > > > registered UINav atom 'main/install/select_subparts' > > > UINav.Atom 'main/install/warn_omitted_subpartitions' was > > configured as 'ignore' > > > couldn't register UINav atom from file > > '405_warn_omitted_subparts.lua' > > > registered UINav atom 'main/install/create_subparts' > > > UINav.Atom 'main/install/select_additional_filesystems' was > > configured as 'ignore' > > > couldn't register UINav atom from file > > '410_select_additional_filesystems.lua' > > > registered UINav atom 'main/install/preselect_packages' > > > UINav.Atom 'main/install/select_packages' was configured as 'ignore' > > > couldn't register UINav atom from file '450_select_packages.lua' > > > UINav.Atom 'main/install/confirm_install_os' was configured > > as 'ignore' > > > couldn't register UINav atom from file '490_confirm_install_os.lua' > > > registered UINav atom 'main/install/install_os' > > > registered UINav atom 'main/install/pfsense_after_install' > > > '600_upgrade_after_installation.lua' skipped, reason: nil > > > UINav.Atom 'main/install/finished' was configured as 'ignore' > > > couldn't register UINav atom from file '800_finished.lua' > > > registered UINav atom 'main/install/reboot' > > > 'main.lua' skipped, it is the currently executing script > > > Flow executing -> main/install/select_disk (Select Disk) > > > [Sun Oct 2 15:41:29 2005] > > > Flow executing -> main/install/partition_disk (Partition Disk) > > > ,- opened pty to '/FreeSBIE/sbin/mount' > > > < /dev/md0 on / (ufs, local) > > > < devfs on /dev (devfs, local) > > > < /dev/acd0 on /FreeSBIE (cd9660, local, read-only) > > > < /dev/md1.uzip on /usr (ufs, local, read-only) > > > < /dev/md2 on /tmp (ufs, local, noatime, noexec, nosuid, > > soft-updates) > > > < devfs on /FreeSBIE/dev (devfs, local) > > > < /dev/md3.uzip on /FreeSBIE/usr (ufs, local, read-only) > > > < /dev/md4.uzip on /FreeSBIE/var (ufs, local, read-only) > > > < <above>:/.var on /FreeSBIE/var (unionfs, local, noclusterw) > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/mount' > > > [Sun Oct 2 15:41:36 2005] > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0 || /FreeSBIE/bin/sh MAKEDEV ad0' > > > [Sun Oct 2 15:41:37 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'g c978 h16 s32' > >/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'p 1 165 32 500704' > >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'p 2 0 0 0' >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'p 3 0 0 0' >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'p 4 0 0 0' >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'a 1' >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/cat /tmp/new.fdisk' > > > | g c978 h16 s32 > > > | p 1 165 32 500704 > > > | p 2 0 0 0 > > > | p 3 0 0 0 > > > | p 4 0 0 0 > > > | a 1 > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/fdisk -v -f /tmp/new.fdisk ad0' > > > | ******* Working on device /dev/ad0 ******* > > > | parameters extracted from in-core disklabel are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | parameters to be used for BIOS calculations are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | Information from DOS bootblock is: > > > | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > | start 32, size 500704 (244 Meg), flag 80 (active) > > > | beg: cyl 0/ head 1/ sector 1; > > > | end: cyl 977/ head 15/ sector 32 > > > | 2: <UNUSED> > > > | 3: <UNUSED> > > > | 4: <UNUSED> > > > | fdisk: Geom not found > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/fdisk ad0' > > > | ******* Working on device /dev/ad0 ******* > > > | parameters extracted from in-core disklabel are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | parameters to be used for BIOS calculations are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | Media sector size is 512 > > > | Warning: BIOS sector numbering starts with sector 1 > > Information from > > > | DOS bootblock is: The data for partition 1 is: > > > | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > | start 32, size 500704 (244 Meg), flag 80 (active) > > > | beg: cyl 0/ head 1/ sector 1; > > > | end: cyl 977/ head 15/ sector 32 > > > | The data for partition 2 is: > > > | <UNUSED> > > > | The data for partition 3 is: > > > | <UNUSED> > > > | The data for partition 4 is: > > > | <UNUSED> > > > `->>> Exit status: 0 > > > ,- opened pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > > > < 493506560 > > > `- closed pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > > > `/FreeSBIE/sbin/sysctl -n hw.physmem` returned: 493506560 > > > ,- opened pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > > > < ad0 > > > `- closed pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > > > `/FreeSBIE/sbin/sysctl -n kern.disks` returned: ad0 Surveying Disk: > > > ad0 ... > > > WARNING: couldn't open '/FreeSBIE/var/log/dmesg.boot' > > > ,- opened pty to '/FreeSBIE/sbin/atacontrol list' > > > < ATA channel 0: > > > < Master: ad0 <Transcend 256M/1.1> ATA/ATAPI revision 0 > > > < Slave: no device present > > > < ATA channel 1: > > > < Master: acd0 <LTN526S/YS0N> ATA/ATAPI revision 0 > > > < Slave: no device present > > > < ATA channel 2: > > > < Master: no device present > > > < Slave: no device present > > > < ATA channel 3: > > > < Master: no device present > > > < Slave: no device present > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/atacontrol list' > > > ,- opened pty to '/FreeSBIE/sbin/fdisk -t -I ad0' > > > < ******* Working on device /dev/ad0 ******* > > > < parameters extracted from in-core disklabel are: > > > < cylinders=978 heads=16 sectors/track=32 (512 blks/cyl) > > > < > > > < parameters to be used for BIOS calculations are: > > > < cylinders=978 heads=16 sectors/track=32 (512 blks/cyl) > > > < > > > < Information from DOS bootblock is: > > > < 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > < start 32, size 500704 (244 Meg), flag 80 (active) > > > < beg: cyl 0/ head 1/ sector 1; > > > < end: cyl 977/ head 15/ sector 32 > > > < 2: <UNUSED> > > > < 3: <UNUSED> > > > < 4: <UNUSED> > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/fdisk -t -I ad0' > > > Disk ad0 (ad0): 244.5M: 978/16/32 > > > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > > > < /dev/ad0: 978 cyl 16 hd 32 sec > > > < Part Start Size Type Flags > > > < 1: 32 500704 0xa5 0x80 > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > > > Surveying Partition: 1: 32,500704:165/true > > > ,- opened pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > > > < # /dev/ad0s1: > > > < 8 partitions: > > > < # size offset fstype [fsize bsize bps/cpg] > > > < a: 500704 0 4.2BSD 2048 16384 31296 > > > Surveying Subpartition on ad0s1: a: 0,500704: 4.2BSD > > F=2048, B=16384 > > > < c: 500704 0 unused 0 0 # > > "raw" part, don't edit > > > Surveying Subpartition on ad0s1: c: 0,500704: unused F=0, > > B=0 ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > > > [Sun Oct 2 15:41:39 2005] > > > Flow executing -> main/install/install_bootblocks (Install > > Bootblocks) > > > [Sun Oct 2 15:41:44 2005] > > > Flow executing -> main/install/select_part (Select Partition) > > > [Sun Oct 2 15:41:45 2005] > > > ,- opened pty to '/FreeSBIE/sbin/mount' > > > < /dev/md0 on / (ufs, local) > > > < devfs on /dev (devfs, local) > > > < /dev/acd0 on /FreeSBIE (cd9660, local, read-only) > > > < /dev/md1.uzip on /usr (ufs, local, read-only) > > > < /dev/md2 on /tmp (ufs, local, noatime, noexec, nosuid, > > soft-updates) > > > < devfs on /FreeSBIE/dev (devfs, local) > > > < /dev/md3.uzip on /FreeSBIE/usr (ufs, local, read-only) > > > < /dev/md4.uzip on /FreeSBIE/var (ufs, local, read-only) > > > < <above>:/.var on /FreeSBIE/var (unionfs, local, noclusterw) > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/mount' > > > ,- opened pty to '/FreeSBIE/usr/sbin/pstat -s -k' > > > < Device 1K-blocks Used Avail Capacity > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/usr/sbin/pstat -s -k' > > > [Sun Oct 2 15:41:46 2005] > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0s1 || /FreeSBIE/bin/sh MAKEDEV ad0s1' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/fdisk ad0' > > > | ******* Working on device /dev/ad0 ******* > > > | parameters extracted from in-core disklabel are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | parameters to be used for BIOS calculations are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | Media sector size is 512 > > > | Warning: BIOS sector numbering starts with sector 1 > > Information from > > > | DOS bootblock is: The data for partition 1 is: > > > | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > | start 32, size 500704 (244 Meg), flag 80 (active) > > > | beg: cyl 0/ head 1/ sector 1; > > > | end: cyl 977/ head 15/ sector 32 > > > | The data for partition 2 is: > > > | <UNUSED> > > > | The data for partition 3 is: > > > | <UNUSED> > > > | The data for partition 4 is: > > > | <UNUSED> > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'g c978 h16 s32' > >/tmp/new.fdisk' > > > `->>> Exit status: 0 ,-<<< Executing `/FreeSBIE/bin/echo 'p > > 1 165 32 > > > 500704' >>/tmp/new.fdisk' `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo 'a 1' >>/tmp/new.fdisk' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/cat /tmp/new.fdisk' > > > | g c978 h16 s32 > > > | p 1 165 32 500704 > > > | a 1 > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/fdisk -v -f /tmp/new.fdisk ad0' > > > | ******* Working on device /dev/ad0 ******* > > > | parameters extracted from in-core disklabel are: > > > [Sun Oct 2 15:41:47 2005] > > > | cylinders=978 heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | parameters to be used for BIOS calculations are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | Information from DOS bootblock is: > > > | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > | start 32, size 500704 (244 Meg), flag 80 (active) > > > | beg: cyl 0/ head 1/ sector 1; > > > | end: cyl 977/ head 15/ sector 32 > > > | 2: <UNUSED> > > > | 3: <UNUSED> > > > | 4: <UNUSED> > > > | fdisk: Geom not found > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/fdisk ad0' > > > | ******* Working on device /dev/ad0 ******* > > > | parameters extracted from in-core disklabel are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | parameters to be used for BIOS calculations are: cylinders=978 > > > | heads=16 sectors/track=32 (512 blks/cyl) > > > | > > > | Media sector size is 512 > > > | Warning: BIOS sector numbering starts with sector 1 > > Information from > > > | DOS bootblock is: The data for partition 1 is: > > > | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > > > | start 32, size 500704 (244 Meg), flag 80 (active) > > > | beg: cyl 0/ head 1/ sector 1; > > > | end: cyl 977/ head 15/ sector 32 > > > | The data for partition 2 is: > > > | <UNUSED> > > > | The data for partition 3 is: > > > | <UNUSED> > > > | The data for partition 4 is: > > > | <UNUSED> > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c ad0s1 || > > > /FreeSBIE/bin/sh MAKEDEV ad0s1' `->>> Exit status: 0 ,-<<< > > Executing > > > `/FreeSBIE/sbin/bsdlabel -B -w ad0s1 auto' `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/bsdlabel ad0s1 > > >/tmp/install.disklabel.ad0s1' > > > `->>> Exit status: 0 > > > [Sun Oct 2 15:41:48 2005] > > > Flow executing -> main/install/select_subparts (Select > > Subpartitions) > > > [Sun Oct 2 15:41:53 2005] > > > Flow executing -> main/install/create_subparts (Create > > Subpartitions) > > > ,-<<< Executing `/FreeSBIE/usr/bin/awk '$2=="partitions:" > > || cut { cut = 1 } !cut { print $0 }' > > </tmp/install.disklabel.ad0s1 >/tmp/install.disklabel' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '8 partitions:' > >>/tmp/install.disklabel' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '# size offset > > fstype [fsize bsize bps/cpg]' >>/tmp/install.disklabel' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo ' a: 500704 0 > > 4.2BSD 2048 16384 99' >>/tmp/install.disklabel' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/bin/grep -E > > '^[[:space:]]*[c][[:space:]]*:' /tmp/install.disklabel.ad0s1 > > >>/tmp/install.disklabel' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/cat /tmp/install.disklabel' > > > | # /dev/ad0s1: > > > | 8 partitions: > > > | # size offset fstype [fsize bsize bps/cpg] > > > | a: 500704 0 4.2BSD 2048 16384 99 > > > | c: 500704 0 unused 0 0 # > > "raw" part, don't edit > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/bsdlabel -R ad0s1 > > > /tmp/install.disklabel' `->>> Exit status: 0 ,-<<< Executing > > > `/FreeSBIE/sbin/bsdlabel ad0s1' > > > | # /dev/ad0s1: > > > | 8 partitions: > > > | # size offset fstype [fsize bsize bps/cpg] > > > | a: 500704 0 4.2BSD 2048 16384 99 > > > | c: 500704 0 unused 0 0 # > > "raw" part, don't edit > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c ad0s1 || > > > /FreeSBIE/bin/sh MAKEDEV ad0s1' `->>> Exit status: 0 ,-<<< > > Executing > > > `/FreeSBIE/sbin/bsdlabel -B ad0s1' `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0 || /FreeSBIE/bin/sh MAKEDEV ad0' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0s1 || /FreeSBIE/bin/sh MAKEDEV ad0s1' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0s1a || /FreeSBIE/bin/sh MAKEDEV ad0s1a' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/newfs /FreeSBIE/dev/ad0s1a' > > > [Sun Oct 2 15:41:54 2005] > > > | /FreeSBIE/dev/ad0s1a: 244.5MB (500704 sectors) block size > > 16384, fragment size 2048 > > > | using 4 cylinder groups of 61.12MB, 3912 blks, 7872 inodes. > > > | super-block backups (for fsck -b #) at: 160, 125344, > > 250528, 375712 > > > `->>> Exit status: 0 > > > Flow executing -> main/install/preselect_packages (Pre-select > > > Packages) Flow executing -> main/install/install_os (Install OS) > > > ,- opened pty to '/FreeSBIE/usr/sbin/pstat -s -k' > > > < Device 1K-blocks Used Avail Capacity > > > ( EOF ) > > > `- closed pty to '/FreeSBIE/usr/sbin/pstat -s -k' > > > ,- opened pty to '/FreeSBIE/sbin/mount' > > > < /dev/md0 on / (ufs, local) > > > < devfs on /dev (devfs, local) > > > < /dev/acd0 on /FreeSBIE (cd9660, local, read-only) > > > < /dev/md1.uzip on /usr (ufs, local, read-only) > > > < /dev/md2 on /tmp (ufs, local, noatime, noexec, nosuid, > > soft-updates) > > > < devfs on /FreeSBIE/dev (devfs, local) < /dev/md3.uzip on > > > /FreeSBIE/usr (ufs, local, read-only) < /dev/md4.uzip on > > /FreeSBIE/var > > > (ufs, local, read-only) < <above>:/.var on /FreeSBIE/var (unionfs, > > > local, noclusterw) ( EOF ) > > > `- closed pty to '/FreeSBIE/sbin/mount' > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0 || /FreeSBIE/bin/sh MAKEDEV ad0' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0s1 || /FreeSBIE/bin/sh MAKEDEV ad0s1' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c > > ad0s1a || /FreeSBIE/bin/sh MAKEDEV ad0s1a' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/mount /FreeSBIE/dev/ad0s1a > > /FreeSBIE/mnt/' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/boot /FreeSBIE/mnt/boot' > > > [Sun Oct 2 15:42:05 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/COPYRIGHT /FreeSBIE/mnt/COPYRIGHT' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/bin /FreeSBIE/mnt/bin' > > > [Sun Oct 2 15:42:11 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/conf /FreeSBIE/mnt/conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/conf.default /FreeSBIE/mnt/conf.default' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/dev /FreeSBIE/mnt/dev' > > > [Sun Oct 2 15:42:20 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/etc /FreeSBIE/mnt/etc' > > > [Sun Oct 2 15:43:13 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/libexec /FreeSBIE/mnt/libexec' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/lib /FreeSBIE/mnt/lib' > > > [Sun Oct 2 15:43:19 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/root /FreeSBIE/mnt/root' > > > [Sun Oct 2 15:43:20 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/sbin /FreeSBIE/mnt/sbin' > > > [Sun Oct 2 15:43:33 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/sys /FreeSBIE/mnt/sys' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/usr /FreeSBIE/mnt/usr' > > > [Sun Oct 2 15:50:35 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/local/bin/cpdup -vvv -I -o > > /FreeSBIE/var /FreeSBIE/mnt/var' > > > [Sun Oct 2 15:50:41 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/rm -rf /FreeSBIE/mnt//var/db/pkg' > > > [Sun Oct 2 15:50:42 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/mkdir -p /FreeSBIE/mnt//var/db/pkg' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/chmod 755 /FreeSBIE/mnt//var/db/pkg' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/mkdir -p /FreeSBIE/mnt/usr/local' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/sbin/mtree -deU -f > > /FreeSBIE/etc/mtree/BSD.local.dist -p /FreeSBIE/mnt/usr/local' > > > [Sun Oct 2 15:50:43 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/mkdir -p /FreeSBIE/mnt/usr/X11R6' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/usr/sbin/mtree -deU -f > > /FreeSBIE/etc/mtree/BSD.x11-4.dist -p /FreeSBIE/mnt/usr/X11R6' > > > [Sun Oct 2 15:51:03 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/rm -rf /FreeSBIE/mnt/tmp' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/mkdir -p /FreeSBIE/mnt/tmp' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/chmod 1777 /FreeSBIE/mnt/tmp' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/rm -f > > /FreeSBIE/mnt//boot/loader.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/mkdir /FreeSBIE/mnt//mnt' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '# Device > > Mountpoint FStype Options Dump Pass#' > >/FreeSBIE/mnt/etc/fstab' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '/dev/ad0s1a > > / ufs rw 1 1' > >>/FreeSBIE/mnt//etc/fstab' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/sbin/bsdlabel ad0s1 > > >/FreeSBIE/mnt//etc/disklabel.ad0s1' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '# -- BEGIN BSD > > Installer automatically generated configuration -- #' > >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '# -- Written on > > '`date`'-- #' >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo > > "hostname='install.observer.lt'" >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo "ifconfig_fxp0='inet > > 10.11.0.240 netmask 255.255.255.0'" >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo > > "defaultrouter='10.11.0.21'" >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/FreeSBIE/bin/echo '# -- END of BSD > > Installer automatically generated configuration -- #' > >>/FreeSBIE/mnt//etc/rc.conf' > > > `->>> Exit status: 0 > > > Flow executing -> main/install/pfsense_after_install > > (pfSense After Installation Routines) > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -rf /FreeSBIE/mnt/cloop' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -rf /FreeSBIE/mnt/dist' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.d/freesbie_1st' > > > [Sun Oct 2 15:51:04 2005] > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f > > /FreeSBIE/mnt/usr/local/share/freesbie/files/000.freesbie_2nd.sh' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.local' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/root/.tcshrc' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.firewall' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/rc.sendmail' > > > `->>> Exit status: 0 > > > ,-<<< Executing `touch /FreeSBIE/mnt/etc/rc.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `mkdir -p /FreeSBIE/mnt/cf/conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cp /cf/conf/* /FreeSBIE/mnt/cf/conf/' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `touch /FreeSBIE/mnt/root/.part_mount' > > > `->>> Exit status: 0 > > > ,-<<< Executing `touch /FreeSBIE/mnt/root/.first_time' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > [Sun Oct 2 15:51:05 2005] > > > ,-<<< Executing `cat /boot/loader.conf | grep -v ^mfsroot > > > /FreeSBIE/mnt/boot/loader.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `echo debug.acpi.disable=\"thermal\" >> > > /FreeSBIE/mnt/boot/loader.conf' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `cd /FreeSBIE/mnt && rm -rf FreeSBIE/ > > cloop/ dist/ boot/mfsroot.gz' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f /FreeSBIE/mnt/etc/motd' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `echo "pfSense" > /FreeSBIE/mnt/etc/platform' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `echo "" > /FreeSBIE/mnt/root/.tcshrc' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -rf /FreeSBIE/mnt/scripts' > > > `->>> Exit status: 0 > > > ,-<<< Executing `find /FreeSBIE/mnt/ -name installer -or > > -name lua_installer -exec rm {} \;' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `rm -f > > /FreeSBIE/mnt/usr/local/bin/after_installation_routines.sh' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `touch /tmp/install_complete' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `chmod a-w /FreeSBIE/mnt/boot/loader.rc' > > > `->>> Exit status: 0 > > > ,-<<< Executing `chflags schg /FreeSBIE/mnt/boot/loader.rc' > > > `->>> Exit status: 0 > > > ,-<<< Executing `' > > > `->>> Exit status: 0 > > > ,-<<< Executing `/bin/sync' > > > `->>> Exit status: 0 > > > ,-<<< Executing `mv /tmp/init_bootloader.sh /FreeSBIE/mnt/etc/' > > > | mv: rename /tmp/init_bootloader.sh to > > > | /FreeSBIE/mnt/etc/init_bootloader.sh: No such file or directory > > > `->>> Exit status: 1 > > > [Sun Oct 2 15:51:16 2005] > > > ,-<<< Executing `mv /tmp/init_bootloader.sh /FreeSBIE/mnt/etc/' > > > | mv: rename /tmp/init_bootloader.sh to > > > | /FreeSBIE/mnt/etc/init_bootloader.sh: No such file or directory > > > `->>> Exit status: 1 > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
