Hi, Have a look on to this thread http://www.mail-archive.com/[email protected]/msg00499.html I'm using this (the 128MB image) on a generic PC with a 128MB CF card for weeks now without problem. Its great.
best regards Imre Ispanovits On Mon, 10 Oct 2005 22:43:34 -0400 [EMAIL PROTECTED] wrote: > Hello, > > > > I've been struggling trying to install pfSense on my system for several days > now. My system only has 1 IDE channel. I am planning on running off of a > Compact Flash through an IDE adapter. This way, my system will have no > moving parts but the Fan on the processor. I have attempted to download the > CF image file for the WRAP, but that apparently doesn't boot because it's > missing VGA. Then I tried to install by using a USB CF adapter and CDROM on > the IDE channel. I was able to boot off of the CD, however it says that it > requires 300 MB to install. I was trying to do the install on a 256 MB CF. > So I'm confused as to why the LiveCD install requires so much space in > compared to the CF image for the WRAP. Is it possible to create a Generic > PC CF image similar to the one that is put out for monowall? I'd prefer not > to buy another CF card. Also, I think it makes sense to put space > requirements for hard drive installation on the Hardware FAQ page. > > > > Am I missing something obvious, or is there no way to install pfSense on a > 256 MB CF for a Generic PC. > > > > Also, it would be really nice if it could be installed via either PXE or > boot floppy for systems that don't have a CDROM drive. > > > > Thanks, > > Joe. > -- This email is made from 100% recycled electrons --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
