Also, in addition to John's great suggestions if this still doesn't work, try sipproxd in the packages section (if you are not running on a embedded platform).
Scott On 10/13/05, John Cianfarani <[EMAIL PROTECTED]> wrote: > > > > What protocol SIP or IAX? > > > > If it's IAX (recommended for clients dealing with nat) you need to forward > port UDP 4569 to your asterisk box. > > > > If it's SIP you need to forward port TCP 5060 and UDP 16384-32767 to your > asterisk box. > > Also make sure nat=yes and quality=yes are enabled for that extension in the > sip.conf > > > > Just so you know gettings clients to work behind NAT can be very tricky. > > > > http://www.voip-info.org has a wealth of knowledge on the topic. > > > > Someone here can probably give you better info for installing the package > but this is what I think would work. > > SSH/console in. > > > > /etc/rc.conf_mount_rw > > pkg_add > http://ftp2.freebsd.org/pub/FreeBSD/ports/i386/packages-6-current/All/siproxd-0.5.11.tbz > > /etc/rc.conf_mount_ro > > > > Not sure if you would be able to configure through the gui or if you have to > edit conf files. > > > > Hope that helps > > John > > > > > > > > > > > > ________________________________ > > > From: Susanto Leman [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 13, 2005 9:19 PM > To: support@pfsense.com > Subject: [pfSense Support] Asterisk behind pfSense > > > > > Hi, > > > > I am having problem for remote user to register my asterisk. Initially, It > was working fine. I read from the support email. Someone installed siproxd. > > And its working. How to install on my wrap ? using shell to install ? I > notice that the feature "Install Package" is removed from my WRAP. > > I saw that feature in the earlier version. Is that so ? > > -santo- > > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
