Make sure all the clients are pointed to the DNS Forwarder. If the correct DNS servers are entered in each firewall then it should query upstream properly.
On 10/16/05, Manuj Aggarwal <[EMAIL PROTECTED]> wrote: > I did enable it - but it did not make a difference. > > When I set the DNS to 4.2.2.2 and uncheck the "Allow DNS server list to > be overridden by DHCP/PPP on WAN" it works fine. > > Any ideas? > > Scott Ullrich wrote: > > Use the built in DNS forwarder. This will force it to use the upstream DNS. > > > > Scott > > > > > > On 10/16/05, Manuj Aggarwal <[EMAIL PROTECTED]> wrote: > > > >> Hi > >> > >> Since my last email about trying to setup a dual WAN setup - I have > >> found that there is a problem how PFSense configures DNS settings. It > >> uses WAN1s DNS settings as global DNS settings for the whole system. My > >> ISPs do not support DNS queries froe m another network. So when a request > >> which is supposed to go out via WAN2 is sent out - it tries to use the > >> DNS server of WAN1 which obviously is blocked and which causes the whole > >> request to fail. > >> > >> Any idea whether there is a work around for that other than hosting your > >> own DNS? > >> > >> Thanks > >> Manuj > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > >> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
