Thanks again! I'm passing this on to Chris. Scott
On 10/20/05, Kevin Wolf <[EMAIL PROTECTED]> wrote: > Alright, just tried installing 0.88. Something's definately better, > mainly the geometry it now lists is the same geometry IPcop uses to > install, which is the same geometry I normally have to set in my BIOS to > get pfSense to install. I left it the way it was since the values were > correct, and proceeded. It failed at partitioning. It seems it isn't > using the values it says it is using. Mainly, it says it's using > 4982/255/63 but if you look at the log, it's using the non-working > 19618/16/255 that my BIOS sends. Here's the log (finally figured out my > isp's smtp server): > > BSD Installer started > DFUI connection on tcp:9999 successfully established > ,- opened pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > < 511074304 > `- closed pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > `/FreeSBIE/sbin/sysctl -n hw.physmem` returned: 511074304 > ,- opened pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > < ad0 > `- closed pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > `/FreeSBIE/sbin/sysctl -n kern.disks` returned: ad0 > Surveying Disk: ad0 ... > ,- opened pty to '/FreeSBIE/sbin/atacontrol list' > [Thu Oct 20 08:02:43 2005] > < ATA channel 0: > < Master: ad0 <Maxtor 4D040H2/DAK019K0> ATA/ATAPI revision 6 > < Slave: no device present > < ATA channel 1: > < Master: acd0 <DVD-ROM BDV316C/VER .20R> ATA/ATAPI revision 0 > < Slave: acd1 <SONY CD-RW CRX140E/1.0n> ATA/ATAPI revision 0 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/atacontrol list' > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > [Thu Oct 20 08:02:45 2005] > < /dev/ad0: 19618 cyl 16 hd 255 sec > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > Disk ad0 (ad0: 39083MB <Maxtor 4D040H2 DAK019K0> at ata0-master UDMA100): > 38.16G: 19618/16/255 > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > < /dev/ad0: 19618 cyl 16 hd 255 sec > < Part Start Size Type Flags > < 1: 63 80043201 0xa5 0x80 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > Surveying Partition: 1: 63,80043201:165/true > ,- opened pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > < # /dev/ad0s1: > < 8 partitions: > < # size offset fstype [fsize bsize bps/cpg] > < a: 77946049 0 4.2BSD 2048 16384 28552 > Surveying Subpartition on ad0s1: a: 0,77946049: 4.2BSD F=2048, B=16384 > < b: 2097152 77946049 swap > Surveying Subpartition on ad0s1: b: 77946049,2097152: swap F=0, B=0 > < c: 80043201 0 unused 0 0 # "raw" part, don't > edit > Surveying Subpartition on ad0s1: c: 0,80043201: unused F=0, B=0 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > ,- opened pty to '/FreeSBIE/sbin/ifconfig -l' > < xl0 xl1 plip0 pfsync0 pflog0 lo0 > `- closed pty to '/FreeSBIE/sbin/ifconfig -l' > ,- opened pty to '/FreeSBIE/sbin/ifconfig xl0' > < xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > < options=9<RXCSUM,VLAN_MTU> > < inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 > < inet6 fe80::210:5aff:fe1d:4ab0%xl0 prefixlen 64 scopeid 0x1 > < ether 00:10:5a:1d:4a:b0 > < media: Ethernet autoselect (100baseTX <full-duplex>) > < status: active > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig xl0' > ,- opened pty to '/FreeSBIE/sbin/ifconfig xl1' > < xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > < options=9<RXCSUM,VLAN_MTU> > < inet6 fe80::201:2ff:fe43:d102%xl1 prefixlen 64 scopeid 0x2 > < inet 68.7.144.105 netmask 0xfffffc00 broadcast 68.7.147.255 > < ether 00:01:02:43:d1:02 > < media: Ethernet autoselect (100baseTX <full-duplex>) > < status: active > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig xl1' > ,- opened pty to '/FreeSBIE/sbin/ifconfig plip0' > < plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig plip0' > ,- opened pty to '/FreeSBIE/sbin/ifconfig pfsync0' > < pfsync0: flags=41<UP,RUNNING> mtu 2020 > < pfsync: syncdev: lo0 maxupd: 128 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig pfsync0' > ,- opened pty to '/FreeSBIE/sbin/ifconfig pflog0' > < pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig pflog0' > ,- opened pty to '/FreeSBIE/sbin/ifconfig lo0' > < lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > < inet6 ::1 prefixlen 128 > < inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > < inet 127.0.0.1 netmask 0xffffff00 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/ifconfig lo0' > '/usr/local/share/dfuibe_lua/pit//.' skipped, it is a directory > '/usr/local/share/dfuibe_lua/pit//..' skipped, it is a directory > UINav.Atom 'pre_install_tasks/welcome' was configured as 'ignore' > couldn't register UINav atom from file '050_welcome.lua' > '100_select_language.lua' skipped, reason: nil > registered UINav atom 'pre_install_tasks/configure_console' > UINav.Atom 'pre_install_tasks/load_kernel_modules' was configured as 'ignore' > couldn't register UINav atom from file '400_load_kernel_modules.lua' > registered UINav atom 'pre_install_tasks/configure_network' > 'main.lua' skipped, it is the currently executing script > Flow executing -> pre_install_tasks/configure_console (Configure Console) > [Thu Oct 20 08:02:46 2005] > Flow executing -> pre_install_tasks/configure_network (Configure your Network) > '/usr/local/share/dfuibe_lua//.' skipped, it is a directory > '/usr/local/share/dfuibe_lua//..' skipped, it is a directory > registered UINav atom 'main/install_os' > UINav.Atom 'main/configure_installed_system' was configured as 'ignore' > couldn't register UINav atom from file '400_configure.lua' > UINav.Atom 'main/upgrade_installed_system' was configured as 'ignore' > couldn't register UINav atom from file '600_upgrade.lua' > UINav.Atom 'main/set_up_netboot' was configured as 'ignore' > couldn't register UINav atom from file '800_netboot.lua' > registered UINav atom 'main/reboot' > '/usr/local/share/dfuibe_lua//conf' skipped, it is a directory > '/usr/local/share/dfuibe_lua//configure' skipped, it is a directory > '/usr/local/share/dfuibe_lua//install' skipped, it is a directory > '/usr/local/share/dfuibe_lua//lib' skipped, it is a directory > 'main.lua' skipped, it is the currently executing script > '/usr/local/share/dfuibe_lua//netboot' skipped, it is a directory > '/usr/local/share/dfuibe_lua//pit' skipped, it is a directory > '/usr/local/share/dfuibe_lua//upgrade' skipped, it is a directory > [Thu Oct 20 08:02:47 2005] > Menu.Item Selected -> main/install_os (Install pfSense) > '/usr/local/share/dfuibe_lua/install//.' skipped, it is a directory > '/usr/local/share/dfuibe_lua/install//..' skipped, it is a directory > UINav.Atom 'main/install/welcome' was configured as 'ignore' > couldn't register UINav atom from file '100_welcome.lua' > registered UINav atom 'main/install/select_disk' > registered UINav atom 'main/install/format_disk' > registered UINav atom 'main/install/partition_disk' > registered UINav atom 'main/install/install_bootblocks' > registered UINav atom 'main/install/select_part' > registered UINav atom 'main/install/select_subparts' > UINav.Atom 'main/install/warn_omitted_subpartitions' was configured as > 'ignore' > couldn't register UINav atom from file '405_warn_omitted_subparts.lua' > registered UINav atom 'main/install/create_subparts' > UINav.Atom 'main/install/select_additional_filesystems' was configured as > 'ignore' > couldn't register UINav atom from file '410_select_additional_filesystems.lua' > registered UINav atom 'main/install/preselect_packages' > UINav.Atom 'main/install/select_packages' was configured as 'ignore' > couldn't register UINav atom from file '450_select_packages.lua' > UINav.Atom 'main/install/confirm_install_os' was configured as 'ignore' > couldn't register UINav atom from file '490_confirm_install_os.lua' > registered UINav atom 'main/install/install_os' > registered UINav atom 'main/install/pfsense_after_install' > [Thu Oct 20 08:02:48 2005] > registered UINav atom 'main/install/upgrade_pfsense' > UINav.Atom 'main/install/finished' was configured as 'ignore' > couldn't register UINav atom from file '800_finished.lua' > registered UINav atom 'main/install/reboot' > 'main.lua' skipped, it is the currently executing script > Flow executing -> main/install/select_disk (Select Disk) > [Thu Oct 20 08:02:49 2005] > Flow executing -> main/install/format_disk (Format Disk) > [Thu Oct 20 08:02:57 2005] > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c ad0 || > /FreeSBIE/bin/sh MAKEDEV ad0' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/sbin/fdisk -I ad0' > | ******* Working on device /dev/ad0 ******* > | fdisk: Geom not found > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'g c4982 h255 s63' >/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 1 165 63 80035767' >>/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 2 0 0 0' >>/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 3 0 0 0' >>/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 4 0 0 0' >>/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'a 1' >>/tmp/format.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/cat /tmp/format.fdisk' > | g c4982 h255 s63 > | p 1 165 63 80035767 > | p 2 0 0 0 > | p 3 0 0 0 > | p 4 0 0 0 > | a 1 > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/sbin/fdisk -v -f /tmp/format.fdisk ad0' > | ******* Working on device /dev/ad0 ******* > | fdisk: WARNING line 1: number of cylinders (4982) may be out-of-range > | (must be within 1-1024 for normal BIOS operation, unless the entire disk > | is dedicated to FreeBSD) > | parameters extracted from in-core disklabel are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Figures below won't work with BIOS for partitions not in cyl 1 > | parameters to be used for BIOS calculations are: > | cylinders=4982 heads=255 sectors/track=63 (16065 blks/cyl) > | > | Information from DOS bootblock is: > | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > | start 63, size 80035767 (39079 Meg), flag 80 (active) > | beg: cyl 0/ head 1/ sector 1; > | end: cyl 885/ head 254/ sector 63 > | 2: <UNUSED> > | 3: <UNUSED> > | 4: <UNUSED> > | fdisk: Geom not found > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/sbin/fdisk ad0' > | ******* Working on device /dev/ad0 ******* > | parameters extracted from in-core disklabel are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Figures below won't work with BIOS for partitions not in cyl 1 > | parameters to be used for BIOS calculations are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Media sector size is 512 > | Warning: BIOS sector numbering starts with sector 1 > | Information from DOS bootblock is: > | The data for partition 1 is: > | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > | start 63, size 80035767 (39079 Meg), flag 80 (active) > | beg: cyl 0/ head 1/ sector 1; > | end: cyl 885/ head 254/ sector 63 > | The data for partition 2 is: > | <UNUSED> > | The data for partition 3 is: > | <UNUSED> > | The data for partition 4 is: > | <UNUSED> > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/usr/bin/yes | /FreeSBIE/sbin/fdisk -B ad0' > | ******* Working on device /dev/ad0 ******* > | parameters extracted from in-core disklabel are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Figures below won't work with BIOS for partitions not in cyl 1 > | parameters to be used for BIOS calculations are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Media sector size is 512 > | Warning: BIOS sector numbering starts with sector 1 > | Information from DOS bootblock is: > | The data for partition 1 is: > | sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > | start 63, size 80035767 (39079 Meg), flag 80 (active) > | beg: cyl 0/ head 1/ sector 1; > | end: cyl 885/ head 254/ sector 63 > | The data for partition 2 is: > | <UNUSED> > | The data for partition 3 is: > | <UNUSED> > | The data for partition 4 is: > | <UNUSED> > | Do you want to change the boot code? [n] > | We haven't changed the partition table yet. This is your last chance. > | parameters extracted from in-core disklabel are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Figures below won't work with BIOS for partitions not in cyl 1 > | parameters to be used for BIOS calculations are: > | cylinders=19618 heads=16 sectors/track=255 (4080 blks/cyl) > | > | Information from DOS bootblock is: > | 1: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > | start 63, size 80035767 (39079 Meg), flag 80 (active) > | beg: cyl 0/ head 1/ sector 1; > | end: cyl 885/ head 254/ sector 63 > | 2: <UNUSED> > | 3: <UNUSED> > | 4: <UNUSED> > | Should we write new partition table? [n] fdisk: Geom not found > | yes: stdout: Broken pipe > `->>> Exit status: 0 > ,- opened pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > [Thu Oct 20 08:02:58 2005] > < 511074304 > `- closed pty to '/FreeSBIE/sbin/sysctl -n hw.physmem' > `/FreeSBIE/sbin/sysctl -n hw.physmem` returned: 511074304 > ,- opened pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > < ad0 > `- closed pty to '/FreeSBIE/sbin/sysctl -n kern.disks' > `/FreeSBIE/sbin/sysctl -n kern.disks` returned: ad0 > Surveying Disk: ad0 ... > ,- opened pty to '/FreeSBIE/sbin/atacontrol list' > < ATA channel 0: > < Master: ad0 <Maxtor 4D040H2/DAK019K0> ATA/ATAPI revision 6 > < Slave: no device present > < ATA channel 1: > < Master: acd0 <DVD-ROM BDV316C/VER .20R> ATA/ATAPI revision 0 > < Slave: acd1 <SONY CD-RW CRX140E/1.0n> ATA/ATAPI revision 0 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/atacontrol list' > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > < /dev/ad0: 19618 cyl 16 hd 255 sec > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > Disk ad0 (ad0: 39083MB <Maxtor 4D040H2 DAK019K0> at ata0-master UDMA100): > 38.16G: 19618/16/255 > ,- opened pty to '/FreeSBIE/sbin/fdisk -s ad0' > < /dev/ad0: 19618 cyl 16 hd 255 sec > < Part Start Size Type Flags > < 1: 63 80035767 0xa5 0x80 > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/fdisk -s ad0' > Surveying Partition: 1: 63,80035767:165/true > ,- opened pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > < # /dev/ad0s1: > < 8 partitions: > < # size offset fstype [fsize bsize bps/cpg] > < a: 77946049 0 4.2BSD 2048 16384 28552 > Surveying Subpartition on ad0s1: a: 0,77946049: 4.2BSD F=2048, B=16384 > < b: 2097152 77946049 swap > Surveying Subpartition on ad0s1: b: 77946049,2097152: swap F=0, B=0 > < c: 80043201 0 unused 0 0 # "raw" part, don't > edit > Surveying Subpartition on ad0s1: c: 0,80043201: unused F=0, B=0 > < partition b: partition extends past end of unit > < partition c: partition extends past end of unit > < bsdlabel: partition c doesn't cover the whole unit! > < bsdlabel: An incorrect partition c may cause problems for standard system > utilities > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/bsdlabel ad0s1' > Flow executing -> main/install/partition_disk (Partition Disk) > ,- opened pty to '/FreeSBIE/sbin/mount' > < /dev/md0 on / (ufs, local) > < devfs on /dev (devfs, local) > < /dev/acd1 on /FreeSBIE (cd9660, local, read-only) > < /dev/md1.uzip on /usr (ufs, local, read-only) > < /dev/md2 on /tmp (ufs, local, noatime, noexec, nosuid, soft-updates) > < devfs on /FreeSBIE/dev (devfs, local) > < /dev/md3.uzip on /FreeSBIE/usr (ufs, local, read-only) > < /dev/md4.uzip on /FreeSBIE/var (ufs, local, read-only) > < <above>:/.var on /FreeSBIE/var (unionfs, local, noclusterw) > ( EOF ) > `- closed pty to '/FreeSBIE/sbin/mount' > [Thu Oct 20 08:03:00 2005] > ,-<<< Executing `cd /FreeSBIE/dev && /FreeSBIE/bin/test -c ad0 || > /FreeSBIE/bin/sh MAKEDEV ad0' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'g c19618 h16 s255' >/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 1 165 255 80041185' >>/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 2 0 0 0' >>/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 3 0 0 0' >>/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'p 4 0 0 0' >>/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/echo 'a 1' >>/tmp/new.fdisk' > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/bin/cat /tmp/new.fdisk' > | g c19618 h16 s255 > | p 1 165 255 80041185 > | p 2 0 0 0 > | p 3 0 0 0 > | p 4 0 0 0 > | a 1 > `->>> Exit status: 0 > ,-<<< Executing `/FreeSBIE/sbin/fdisk -v -f /tmp/new.fdisk ad0' > | ******* Working on device /dev/ad0 ******* > | fdisk: WARNING line 1: number of cylinders (19618) may be out-of-range > | (must be within 1-1024 for normal BIOS operation, unless the entire disk > | is dedicated to FreeBSD) > | fdisk: ERROR line 1: number of sectors must be within (1-63) > `->>> Exit status: 1 > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
