Hi Bao, Besides minor issues it works fine. The wireless status page, which was blank in the previous versions works now :) Maybe because now I've changed from 128MB image to 256? The only bothering issue left what I noticed, is the DynDNS update which doesn't work, but it is as I follow the list is a problem for some time now. The only change in this that earlier I could force an update by disabling-enabling the service. Now this doesn't help. On the whole this version is working well. Again thanks for you and all the developers for your work and support.
Bestr regards Imre On Fri, 21 Oct 2005 19:52:27 -0700 (PDT) "Bao C. Ha" <[EMAIL PROTECTED]> wrote: > Hi Scott, > > Do you have any opinons about the other problem that Imre > has? > > >> > > Anyhow I've experienced a "paranormal phenomena". > >> > > I've got a lan 10.0.0.3 and a wifi (opt1) interface 10.0.0.40. > >> > > When I want to access the webgui everything works well if I address > >> to > >> > > 10.0.0.3 > >> > > no matter if I am using the lan IF or the wifi. But if I address to > >> > > 10.0.0.40 the logon > >> > > screen comes up but there doesn't let forward. No message, nothing > >> in > >> > log > >> > > files. > >> > > The login prompt pops back again and again. > > Thanks. > Bao > > On Fri, October 21, 2005 2:09 pm, Scott Ullrich wrote: > >> > "Warning: no access to tty (Inappropriate ioctl for device). > >> > Thus no job control in this shell." > > > > This is a known problem and I am still looking for fixes. We handle > > the console completely different now due to the blasted USB Keyboard > > bug. Not to mention this method is a lot cleaner with exception to > > this issue. If you really need a job control shell, then use SSH. > > Otherwise stay clear of option 8 on the console for items like ping, > > etc. > > > > Scott > > > > > > On 10/21/05, alan walters <[EMAIL PROTECTED]> wrote: > >> These errors happened on wrap when you select option 8 in the console. > >> I can confirmthis ad2 image > >> > >> > -----Original Message----- > >> > From: Bao C. Ha [mailto:[EMAIL PROTECTED] > >> > Sent: 21 October 2005 20:35 > >> > To: [email protected] > >> > Subject: Re: [pfSense Support] Compact Flash images! > >> > > >> > Hi Imre, > >> > > >> > Which image did you use? The ad0 or ad2 ones? > >> > > >> > I don't see the tty error message so I am not sure what > >> > was happening. > >> > > >> > Thanks. > >> > Bao > >> > > >> > On Fri, October 21, 2005 11:38 am, Imre Ispanovits wrote: > >> > > Hi Bao, > >> > > > >> > > I've got a new 256MB Cf and downloaded that image. > >> > > It works now fine. Thank you. > >> > > The shell message still exist > >> > > "Warning: no access to tty (Inappropriate ioctl for device). > >> > > Thus no job control in this shell." > >> > > Anyhow I've experienced a "paranormal phenomena". > >> > > I've got a lan 10.0.0.3 and a wifi (opt1) interface 10.0.0.40. > >> > > When I want to access the webgui everything works well if I address > >> to > >> > > 10.0.0.3 > >> > > no matter if I am using the lan IF or the wifi. But if I address to > >> > > 10.0.0.40 the logon > >> > > screen comes up but there doesn't let forward. No message, nothing > >> in > >> > log > >> > > files. > >> > > The login prompt pops back again and again. > >> > > Otherwise works fine until now. > >> > > Best regards > >> > > Imre > >> > > > >> > > On Thu, 20 Oct 2005 20:28:48 -0700 (PDT) > >> > > "Bao C. Ha" <[EMAIL PROTECTED]> wrote: > >> > > > >> > >> Hi Imre, > >> > >> > >> > >> Please try the newer images, not the full-update ones. I made > >> > >> a mistake on the full-update images, and have uploaded newer > >> > >> ones to replace them. > >> > >> > >> > >> Thanks. > >> > >> Bao > >> > >> > >> > >> On Thu, October 20, 2005 2:41 pm, Imre Ispanovits wrote: > >> > >> > Hi Bao, > >> > >> > > >> > >> > I have tried the new 0.88 image without success :( > >> > >> > > >> > >> > When booting there are bthe following messeges: > >> > >> > ------------------------------------------------ > >> > >> > Booting 'pfSense' > >> > >> > root (hd0,3,a) > >> > >> > Filesystem type is ufs2 type 0xa5 > >> > >> > kernel /boot/loader > >> > >> > Error 15 : File not found > >> > >> > ----------------------------------------------- > >> > >> > > >> > >> > I have written the image several times with the same result. > >> > >> > Other: I can confirm the Shell tty message on 0.86.4, but ... > >> > >> > it is working despite of the message. > >> > >> > > >> > >> > Best regrds > >> > >> > Imre > >> > >> > > >> > >> > On Thu, 20 Oct 2005 13:05:05 -0700 (PDT) > >> > >> > "Bao C. Ha" <[EMAIL PROTECTED]> wrote: > >> > >> > > >> > >> >> Hi Alan. > >> > >> >> > >> > >> >> No, I did not notice the tty error message. > >> > >> >> > >> > >> >> Anyway, I have re-uploaded the files. > >> > >> >> > >> > >> >> For Hacom or Lex systems, which boot the CF from the secondary > >> > >> >> IDE master, /dev/ad2, please use the following images: > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-128- > >> > ad2.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-256- > >> > ad2.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-512- > >> > ad2.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-1gb- > >> > ad2.img.gz > >> > >> >> > >> > >> >> For "generic PC" systems, which boot the CF from the primary > >> > >> >> IDE master, /dev/ad0, please use the following images: > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-128- > >> > ad0.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-256- > >> > ad0.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-512- > >> > ad0.img.gz > >> > >> >> http://shopping.hacom.net/catalog/pub/pfsense/pfSense-0.88-1gb- > >> > ad0.img.gz > >> > >> >> > >> > >> >> Please let me know how they work. > >> > >> >> > >> > >> >> Thanks. > >> > >> >> Bao > >> > >> > > >> > >> > > >> > >> > > >> > >> > -- > >> > >> > This email is made from 100% recycled electrons > >> > >> > This is Linux Land- > >> > >> > In silent nights you can hear the windows machines rebooting > >> > >> > > >> > >> > >> > >> > >> > >> -- > >> > >> Best Regards. > >> > >> Bao C. Ha > >> > >> Hacom OpenBrick Distributor USA http://www.hacom.net > >> > >> voice: (714) 530-8817 fax: (714) 530-8818 > >> > >> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 > >> > >> > >> > >> > >> > >> > >> --------------------------------------------------------------------- > >> > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > >> > > > >> > > > >> > > -- > >> > > This email is made from 100% recycled electrons > >> > > This is Linux Land- > >> > > In silent nights you can hear the windows machines rebooting > >> > > > >> > > >> > > >> > -- > >> > Best Regards. > >> > Bao C. Ha > >> > Hacom OpenBrick Distributor USA http://www.hacom.net > >> > voice: (714) 530-8817 fax: (714) 530-8818 > >> > 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 > >> > > >> > > >> > --------------------------------------------------------------------- > >> > To unsubscribe, e-mail: [EMAIL PROTECTED] > >> > For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > -- > Best Regards. > Bao C. Ha > Hacom OpenBrick Distributor USA http://www.hacom.net > voice: (714) 530-8817 fax: (714) 530-8818 > 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > -- This is Linux Land. In silent nights you can hear the windows machines rebooting
pgpR3u5VmQHYN.pgp
Description: PGP signature
