I'd agree with Alan's description.
for more detail, see:
http://doc.m0n0.ch/handbook/examples-filtered-bridge.html It should
work just like that.
alan walters wrote:
I have a similar configuration where the lan is bridged to the wan.
I just made a rule to allow access to the wan IP. This is accessable
from anywhere as the bridge is in place.
Configuration.
Start with a clean install.
Setup ip address in wan. Gateway etc.
Configure firewall rules access wan IP from https and ssh
Ie: allow all to wan port 443 etc.
Setup allow rules for your other services.
If the block is a private block you will have to turn off
Block private blocks etc on wan interface.
Disable dhcp server on lan
Save the config. Incase it fails.
Then remove ip address from lan and bridge it to wan.
Wait a couple of minutes. Manually restart the box and access the wan ip
address.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
