Scott Ullrich wrote:
I have restored the changes from the version that worked for you.
This opens up a new problem but I'll get that fixed shortly.
Scott
On 10/24/05, Kevin Wolf <[EMAIL PROTECTED]> wrote:
Scott Ullrich wrote:
This hopefully is fixed now. Run a update_file.sh /etc/inc/filter.inc
from a shell then run /etc/rc.filter_configure and please report back
how the line looks now in rules.debug.
Thanks!
On 10/24/05, Kevin Wolf <[EMAIL PROTECTED]> wrote:
Bill Marquette wrote:
On 10/24/05, Kevin Wolf <[EMAIL PROTECTED]> wrote:
I can't find my 0.86.4 cd, and it's not on the mirrors :( Does anyone
have a link where I can download it at?
Here's what cat /tmp/rules.debug | grep 700 looks like from my 0.89.2 setup:
# cat /tmp/rules.debug | grep 700
nat on xl1 from 192.168.1.200/32 to any port 7700 -> (xl1) port 7700
OK, the above is the important one. What it says is that traffic from
192.168.1.200/32 sourced from any port to any IP address on port 7700
will get NAT'd to your external IP (xl1's IP rather) and will source
from port 7700.
I have a sneaky suspicion what you really need is:
nat on xl1 from 192.168.1.200/32 port 7700 to any -> (xl1) port 7700
which matches based on source port. But I'm not sure unless I can see
a working example of this from .86.4
--Bill
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
As far as I can tell, that's what this:
http://img363.imageshack.us/img363/1113/untitled6zf.jpg does. I filled
in the info as I saw it in 0.86.4, the only difference is it looks like
in 0.89.2 one of the port fields moved down. My 0.86.4 entry looks like
this: http://img401.imageshack.us/img401/2757/untitled9dm.jpg
Here's the output on the 0.86.4 I just setup, and verified is working
correctly with my game:
# cat /tmp/rules.debug | grep 700
nat on xl1 from 192.168.1.200/32 port 7700 to any -> (xl1) port 7700
rdr on xl1 proto udp from any to 68.7.144.105 port 7700 -> 192.168.1.200
port 7700
pass in quick on $wan proto udp from any to { 192.168.1.200 } port =
7700 keep state label "USER_RULE: NAT "
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Doesn't look exactly the same as 0.86.4 now, and it's not the same as
before either. Now it shows:
nat on xl1 from 192.168.1.200/32 port 7700 to any port 7700 -> (xl1)
Still doesn't seem to work.
Thanks for trying to fix this :)
Kevin W.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Your changing it back seems to have done the trick. I did the update
thing again, checked the debug file thing and the entry now looks
exactly like it did in 0.86.4, and it's working great!
Thanks for the hard work!
Thanks,
Kevin W.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
