Well for one your setting the _SAME_ ip on two interfaces, your wan
and LAN.  Don't do this!   Use a different IP or use a "fake" ip on
the LAN such as 192.168.1.1.

Scott

On 10/31/05, Scott Ullrich <[EMAIL PROTECTED]> wrote:
> I still don't have any idea what your trying to do.  Send me your
> config.xml off-list.
>
> Scott
>
>
> On 10/31/05, Peter Zaitsev <[EMAIL PROTECTED]> wrote:
> > On Mon, 2005-10-31 at 15:33 -0500, Scott Ullrich wrote:
> > > So what your saying is after "disabling" the firewall and rebooting pf
> > > is still enabled?
> >
> > No.  That is what is the mystery.  The firewall is disabled after I
> > reboot.  pf is not running but  I can't connect to the firewall host
> > (both SSH and HTTPS).   I can connect the boxes  which are behind
> > firewall but not firewall host itself.
> >
> > It seems somehow related to the same IP on LAN and WAN interfaces
> > according to my previous tests.
> >
> > >
> > > On 10/31/05, Peter Zaitsev <[EMAIL PROTECTED]> wrote:
> > > > On Mon, 2005-10-31 at 15:12 -0500, Scott Ullrich wrote:
> > > > > pfctl runs pfctl -f /tmp/rules.debug.  What happens if you run this?
> > > >
> > > > There is no "rules.debug"  if   you have disabled firewall in advanced
> > > > setting and rebooted.
> > > >
> > > > That was my first surprise :)
> > > >
> > > >
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > >
> > > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to