I have a problem with 0.92
(upgraded from .90a). My xl0 interface, which is my LAN (inside)
interface, keeps going up and down as shown in the system log, lots of packet
loss during a continuous ping and general instability of the systems
routing/bridging functionality and webgui. This is a production system, so
I immediately reverted to 0.90a and that fixed it.
I am willing to upgrade back to 0.92 during
off period to get the exact error message in the system log, but what other
information should I provide.
From: Jason J. Ellingson [mailto:[EMAIL PROTECTED]
Sent: Fri 11/4/2005 10:07 PM
To: [email protected]
Subject: [pfSense Support] 0.92 - KaaBOOM!
No joy with 0.92. It keeps dropping the WAN DHCP lease and
pegs out the CPU
to at least 90%.
Putting 0.90a back on and all is
well.
Anything I can do to help you all with troubleshooting? I
won't be
available until tomorrow afternoon
though.
------------------------------------------------------------
Jason
J Ellingson
615.301.1682 : nashville
612.605.1132 :
minneapolis
www.ellingson.com
[EMAIL PROTECTED]
---------------------------------------------------------------------
To
unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands,
e-mail: [EMAIL PROTECTED]
