send me the patch, i think i can accomodate your needs for a customer build
On Mon, 2005-11-07 at 13:43 -0500, Lynn A. Roth wrote: > I submitted this problem to freebsd-current and got a patch back. Is it > possible for me to build a kernel that has this patch and integrate it > into the pfSense install? (And how will this work with future upgrades?) > > Lynn > > > Scott Ullrich wrote: > > At this point I would suggest sending a message to freebsd-current and > > ask why the drive is not working with 6-RC1. > > > > Scott > > > > On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > > > >>I get the same thing with FreeBSD 6.0 RC1. It boots to the installer > >>and then when attempting to install, it says it can't find a disk. The > >>controller is found as a SATA. Here is the relevant portion of dmesg > >>(this is from pfSense, but the RC1 looked the same) > >> > >>atapci0: <Intel ICH7 UDMA100 controller> port > >>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > >>ata0: <ATA channel 0> on atapci0 > >>ata1: <ATA channel 1> on atapci0 > >>atapci1: <Intel ICH7 SATA150 controller> port > >>0xac98-0xac9f,0xac90-0xac93,0xac80-0xac87,0xac78-0xac7b,0xac60-0xac6f > >>mem 0xfeb00000-0xfeb003ff irq 20 at device 31.2 on pci0 > >>ata2: <ATA channel 0> on atapci1 > >>ata3: <ATA channel 1> on atapci1 > >>ata4: <ATA channel 2> on atapci1 > >>ata5: <ATA channel 3> on atapci1 > >> > >> > >>Lynn > >> > >> > >> > >> > >>Scott Ullrich wrote: > >> > >>>It appears that FreeBSD is not seeing this drive as attached for some > >>>reason. Can you try a FreeBSD RC disk? > >>> > >>>On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>>>Some more info: > >>>> > >>>>when I run atacontrol info, it appears that the disk is not attached. I > >>>>have booted to Linux and Windows installer and they both see the disk. I > >>>>believe that the SATA drive should be on ATA channel 2. (According to th > >>>>e boot messages, which show the ICH7 SATA Controller being detected with > >>>>4 channels, 2-5) > >>>> > >>>># atacontrol list > >>>>ATA channel 0: > >>>> Master: acd0 <HL-DT-ST GCR-8240N/1.06> ATA/ATAPI revision 4 > >>>> Slave: no device present > >>>>ATA channel 1: > >>>> Master: no device present > >>>> Slave: no device present > >>>>ATA channel 2: > >>>> Master: no device present > >>>> Slave: no device present > >>>>ATA channel 3: > >>>> Master: no device present > >>>> Slave: no device present > >>>>ATA channel 4: > >>>> Master: no device present > >>>> Slave: no device present > >>>>ATA channel 5: > >>>> Master: no device present > >>>> Slave: no device present > >>>> > >>>> > >>>> > >>>>Scott Ullrich wrote: > >>>> > >>>> > >>>>>Please send the contents of /tmp/ after you receive the error message. > >>>>> CTRL-C a number of times to break back to the shell and then SCP > >>>>>then files somewhere. > >>>>> > >>>>>Scott > >>>>> > >>>>> > >>>>>On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > >>>>> > >>>>> > >>>>> > >>>>>>I should also note that it has a single SATA drive on the first SATA > >>>>>>connection. I get the same issue with both of the two identical > >>>>>>systems. > >>>>>> > >>>>>>Lynn > >>>>>> > >>>>>> > >>>>>>Scott Ullrich wrote: > >>>>>> > >>>>>> > >>>>>> > >>>>>>>What version? > >>>>>>> > >>>>>>>On 11/1/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>>I'm having trouble installing pfSense to my new Dell PE 850. > >>>>>>>> > >>>>>>>>The installer doesn't find a disk. If I do an lsdev before booting, I > >>>>>>>>see the disk and partitions. The system has a ICH7 chipset, which > >>>>>>>>appears to be problematic at this point in time. Does anyone have any > >>>>>>>>idea how I could get this installed? Is there a way to easily update > >>>>>>>>the kernel in the installer? Would that even help? > >>>>>>>> > >>>>>>>>Thanks. > >>>>>>>> > >>>>>>>>Lynn A. Roth > >>>>>>>>Network Administrator > >>>>>>>>Interactive Financial Solutions, Inc. > >>>>>>>> > >>>>>>>> > >>>>>>>>--------------------------------------------------------------------- > >>>>>>>>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>>>>>>>For additional commands, e-mail: [EMAIL PROTECTED] > >>>>>>>> > >>>>>>>> > >>>>>> > >>>>>> > >>>>>>--------------------------------------------------------------------- > >>>>>>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>>>>>For additional commands, e-mail: [EMAIL PROTECTED] > >>>>>> > >>>>>> > >>>> > >>>> > >>>>--------------------------------------------------------------------- > >>>>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>>>For additional commands, e-mail: [EMAIL PROTECTED] > >>>> > >>>> > >> > >> > >>--------------------------------------------------------------------- > >>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
