SASYNCD is not fully finished yet. With that said failover works fine for me and my IP phone that is VPN'd into work.
On 11/10/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > If you need anyone to test, let me know. We aren't in production yet > with these firewalls, so it's not a big deal. Failover is one of the > big reasons we picked pfsense, so I am interested in helping to get it > working well. Thanks for all your work on this. > > Lynn > > > > Scott Ullrich wrote: > > I've been noticing interesting CARP problems here too. Mainly the > > state is INIT. I'm looking into the problem. I plan on moving back > > to RELENG_6 (we're now on RELENG_6_0) to see if it solves the issues. > > > > On 11/9/05, Lynn A. Roth <[EMAIL PROTECTED]> wrote: > > > >>I have my two machines set up. (Thanks Scott for the kernel patch). > >> > >>I followed the CARP Failover tutorial to setup failover. I have a > >>couple of problems. I'll name the two machines A and B. A is supposed > >>to be the primary and B the backup. > >> > >>First, B always grabs master on the carp interfaces. The Advertising > >>Frequency on A (on all the VIPs) is 0. It is 100 on all the VIPs on B. > >>Preemption is set on both machines. > >> > >>It does pass traffic over the CARP interfaces, so I decided to test the > >>failover. When I reboot B, A takes over fine. When B finishes booting > >>back up, it starts to take over from A, but in the process A actually > >>loses the IP on the Sync interface (opt1 named Sync) (no inet address > >>for bge1 via ifconfig) The failback then seems to be in an odd state > >>until I go to the SYNC interface on A and click Save. (ifconfig then > >>shows the IP again) and B takes over everything. > >> > >>I would appreciate any help that anyone could give on this. > >> > >>Thanks, > >>Lynn A. Roth > >> > >> > >>--------------------------------------------------------------------- > >>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
