Try visiting these docs: http://wiki.pfsense.com/wikka.php?wakka=OutgoingLoadBalancing http://wiki.pfsense.com/wikka.php?wakka=IncomingLoadBalancing
Scott On 11/10/05, Lee Hetherington <[EMAIL PROTECTED]> wrote: > Hi, > > Im new to pfsense and have two machines running 0.92 both with 2x Dual > Port 100+ Intel Management adaptors. I cannot for the life of me get > load balancing working. Here is how I have them setup: > > left.pfsense > > fxp1 Lan > fxp2 Cross Over cable to right.pfsense for sync > fxp3 DMZ Servers > fxp4 WAN > > right.pfsense > > fxp1 Lan > fxp2 Cross Over cable to right.pfsense for sync > fxp3 DMZ Servers > fxp4 WAN > > On my internal lan and wan I have carp's setup with virtual ip's. I wish > to use one of my virtual ip's to load balance mail to 2 servers on my > internal lan. I have it all setup as per on the wiki but I cannot get > anything through to the mailservers on the internal lan. I have a > firewall rule which allows * to connect to the virtual ip on port 25. > > Any ideas? please help. > > Lee > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
