Good deal. On 11/12/05, Gil Freund <[EMAIL PROTECTED]> wrote: > Scott Ullrich wrote: > > I have heard reports that the newer HAL in later versions makes some > > ATH cards work that are not reliably probed. > > > > Please try: http://www.pfsense.com/~sullrich/?M=D > > Looks Ok. I tried (all Atheros 5212): > Make 0.88 0.90 0.93 > ==================== ======= ======= ======= > Askey Problem OK OK > Gigabyte GN-WIAG02 Problem Problem OK > Philips (IBM OEM) OK OK OK > > > > > > > Scott > > > > > > On 11/11/05, Marc A. Volovic <[EMAIL PROTECTED]> wrote: > > > >>Hello. > >> > >> I am experiencing a peculiar phenomenon - on a WRAP.1 board (BIOS 1.08), > >>a TP-Link TL-WN660G card is NOT bound to driver on a cold boot (i.e. power > >>cycle) - and therefore not used. The card IS detected, HAL is reported > >>(version 0.9.14.9), but driver remains unbound and card is reported as "not > >>claimed". > >> > >> On subsequent reboots (i.e. console/web ui generated boots), the card is > >>detected but IS bound to the driver and is, therefore, usable. > >> > >> Initially, I suspected both the card and the WRAP. Subsequent tests, with > >>other Mini-PCI Atheros cards and other WRAP boards (I have access to a > >>number of both), proves that the behaviour is repeatable. > >> > >> Linux does not exhibit similar behavior, with HAL 0.9.16.3 being detected > >>and driver (ath_pci 0.9.4.5) bound every boot, cold or warm, on the very > >>same boards and the very same Atheri cards (plural of Atheros, how ;-)... > >> > >> Has anyone seen similar behaviour? What can cause this and how can I > >>provide more pertinent information to check this issue. I readily admit > >>that my BSD experience is dated (SunOS 4.1), and I am trying to bootstrap > >>my memory into a more functional mode (among other stuff to be able to > >>build local versions of the embedded images). > >> > >> Thanks! > >> > >> Marc > >> > >>-- > >>---MAV > >>Marc A. Volovic [EMAIL PROTECTED] > >>Swiftouch, LTD +972-544-676764 > >> > >>--------------------------------------------------------------------- > >>To unsubscribe, e-mail: [EMAIL PROTECTED] > >>For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
