Well, this is now the 3rd issue I have heard of. I have even seen this behavior at my house and I have no idea why. dhclient always exists with "connection closed". Last I heard dhclient uses udp.
On 11/14/05, Lists <[EMAIL PROTECTED]> wrote: > i can agree there but id almost like to see the config for the broken > dhcp box and what card are is he using, if you post it please remove the > passwords or any security information. Id also wonder if anyone else if > using a similiar setup cause this is the first dhcp issue ive heard of > > On Mon, 2005-11-14 at 09:57 -0500, Scott Ullrich wrote: > > If there wasn't a problem then dropping a dhclient from FreeBSD 5 > > wouldn't magically work in 100% of the cases. > > > > On 11/14/05, Lists <[EMAIL PROTECTED]> wrote: > > > LOL ill just watch patiently to see where they change it in the FreeBSD > > > cvs tree then :)) > > > > > > On Mon, 2005-11-14 at 09:42 -0500, Scott Ullrich wrote: > > > > Oh really? Just like they know they have major fdisk problems? Come > > > > on. > > > > > > > > On 11/14/05, Lists <[EMAIL PROTECTED]> wrote: > > > > > uhmmm im sure if there was an issue with dhcp on 6.0 they would > > > > > already > > > > > know about it, and all my 6.0 boxes dhcp fine. so I wonder why we > > > > > question it to be FreeBSD and not a issue with pfsense? > > > > > > > > > > On Mon, 2005-11-14 at 09:33 -0500, Scott Ullrich wrote: > > > > > > Any chance we can get a tcpdump of the process? I will most likely > > > > > > have to send a message to freebsd-current about this. > > > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > > Well, I tried the 0.93.2 and it has the same behavior :( > > > > > > > > > > > > > > I tried with a different NIC for the WAN, but the problem seems > > > > > > > the same. > > > > > > > > > > > > > > I'm posting my "system.log", I replaced the IP addresses like > > > > > > > this: > > > > > > > > > > > > > > XXX.XXX.XXX.XXX -> Gateway address > > > > > > > YYY.YYY.YYY.YYY -> IP address assigned to the WAN interface > > > > > > > BBB.BBB.BBB.BBB -> Broadcast address > > > > > > > DNS.DNS.DNS.DNS -> DNS server address > > > > > > > > > > > > > > I hope this may be useful. > > > > > > > > > > > > > > > > > > > > > I'm going back to 0.92 again :( > > > > > > > > > > > > > > > > > > > > > Thanks Scott, I'll wait for the next release to give it a try :) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Emanuel Gonzalez > > > > > > > Guatemala > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > De: Emanuel A. Gonzalez [mailto:[EMAIL PROTECTED] > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 09:25 p.m. > > > > > > > Para: [email protected] > > > > > > > Asunto: RE: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > Surf to: http://www.pfsense.com/~sullrich/ > > > > > > > > > > > > > > Thanks Scott, I'll try it tonight... > > > > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > De: Lists [mailto:[EMAIL PROTECTED] > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 09:21 p.m. > > > > > > > Para: [email protected] > > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > where is this image ? > > > > > > > > > > > > > > On Sun, 2005-11-13 at 21:34 -0500, Scott Ullrich wrote: > > > > > > > > Image updated. Please give it a try in the ~sullrich directory. > > > > > > > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > > > > Thanks again Scott! > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 06:39 p.m. > > > > > > > > > Para: [email protected] > > > > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > > > > > That is the issue we just solved. I am building a new > > > > > > > > > version. > > > > > > > > > > > > > > > > > > On 11/13/05, Emanuel A. Gonzalez <[EMAIL PROTECTED]> wrote: > > > > > > > > > > I was working on 0.90a version, and since version 0.62.3 > > > > > > > > > > the DHCP on > > > > > > > my > > > > > > > > > wan > > > > > > > > > > was working fine. > > > > > > > > > > > > > > > > > > > > Today I upgraded to a 0.93 version, which I downloaded from > > > > > > > > > > a > > > > > > > "sullrich" > > > > > > > > > > link (I know this is not an official release). Now, my dhcp > > > > > > > > > > wan > > > > > > > doesn't > > > > > > > > > > work, it assign an IP address for about 20 secs. And then > > > > > > > > > > it release > > > > > > > it, > > > > > > > > > and > > > > > > > > > > re-assign it after 20 or 30 secs. > > > > > > > > > > > > > > > > > > > > I try using a static IP on my wan interface, since my ISP > > > > > > > > > > uses a DHCP > > > > > > > > > server > > > > > > > > > > but it always assigns me the same public IP (that's funny), > > > > > > > > > > but it > > > > > > > works > > > > > > > > > > almost the same way. I can ping for about 10 times, then > > > > > > > > > > the > > > > > > > connections > > > > > > > > > > drops, then again it restore my connection and I can ping > > > > > > > > > > again. This > > > > > > > is > > > > > > > > > > odd. > > > > > > > > > > > > > > > > > > > > I decided to downgrade to 0.90a, and the wan DHCP client > > > > > > > > > > it's working > > > > > > > fine > > > > > > > > > > again. > > > > > > > > > > > > > > > > > > > > I'm sorry for hijacking another post, I just intended to > > > > > > > > > > help, maybe > > > > > > > this > > > > > > > > > is > > > > > > > > > > a bug :) > > > > > > > > > > > > > > > > > > > > Thanks again for all your support, we are more than > > > > > > > > > > satisfied with > > > > > > > your > > > > > > > > > > outstanding job! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Emanuel Gonzalez > > > > > > > > > > Guatemala. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Mensaje original----- > > > > > > > > > > De: Scott Ullrich [mailto:[EMAIL PROTECTED] > > > > > > > > > > Enviado el: Domingo, 13 de Noviembre de 2005 03:10 a.m. > > > > > > > > > > Para: [email protected] > > > > > > > > > > Asunto: Re: [pfSense Support] WAN DHCP not working ? > > > > > > > > > > > > > > > > > > > > DHCP generally "just works". I would verify that your > > > > > > > > > > hardware is > > > > > > > > > > FreeBSD friendly at this point as it can be very picky. > > > > > > > > > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > > > On 11/13/05, Ulrik S. Kofod <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > I'm finally ready to go live with this box, replacing a > > > > > > > > > > > really > > > > > > > horrible > > > > > > > > > > router that > > > > > > > > > > > has to be reset every now and then (daily). > > > > > > > > > > > > > > > > > > > > > > I unplugged the old router and inserted the WAN cable > > > > > > > > > > > from the DSL > > > > > > > modem > > > > > > > > > > into the > > > > > > > > > > > WAN interface on the pfSense box, I then checked the > > > > > > > > > > > interfaces > > > > > > > status > > > > > > > > > > page and > > > > > > > > > > > could se that the link was up and dhcp said up but the > > > > > > > > > > > IP address > > > > > > > was > > > > > > > > > > 0.0.0.0 and > > > > > > > > > > > netmask was 255.0.0.0. I tried to release it at renew a > > > > > > > > > > > few times > > > > > > > but > > > > > > > > > > without > > > > > > > > > > > result. I then tested it in the OPT1 interface with same > > > > > > > > > > > result. > > > > > > > > > > > > > > > > > > > > > > The WAN and OPT1 interfases are both setup to get an IP > > > > > > > > > > > from DHCP, > > > > > > > > > nothing > > > > > > > > > > else > > > > > > > > > > > changed. > > > > > > > > > > > > > > > > > > > > > > I added a print screen of it here if my explanation is a > > > > > > > > > > > little > > > > > > > > > confusing > > > > > > > > > > :) > > > > > > > > > > > http://www.cybersite.dk/wan_dhcp.GIF > > > > > > > > > > > > > > > > > > > > > > Do I need to setup anything except make sure the > > > > > > > > > > > interface is setup > > > > > > > as > > > > > > > > > > DHCP like the > > > > > > > > > > > on old router? > > > > > > > > > > > > > > > > > > > > > > Best regards > > > > > > > > > > > Ulrik > > > > > > > > > > > > > > > > > > > > > > PS. I reinstalled the old router and it got the IP like > > > > > > > > > > > it should. > > > > > > > > > > > PPS. I'm using pfSense version 0.92 on a 233MHz pentium > > > > > > > > > > > with 64MB > > > > > > > memory > > > > > > > > > > and a 2GB HDD. > > > > > > > > > > > PPPS. Apart from WAN and OPT1 I also have a LAN and WLAN > > > > > > > > > > > interfase > > > > > > > with > > > > > > > > > > static IP. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - > > > > > > > > > > Fecha de la > > > > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > -- > > > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - > > > > > > > > > Fecha de la > > > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > -- > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha > > > > > > > de la > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > -- > > > > > > > Se certificó que el correo Saliente no contiene virus. > > > > > > > Verificado por Anti-Virus AVG. > > > > > > > Versión: 7.1.362 / Base de datos de virus: 267.13.0/167 - Fecha > > > > > > > de la > > > > > > > versión: 11/11/2005 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
