On 0.94.4 some other ppl had this problem as well. They redid their configuration from scratch (didn't import the previous) and all is well. Perhaps you could try this?
Scott On 11/17/05, Brian <[EMAIL PROTECTED]> wrote: > Here are some specifics on the shaper error. When I reach the end of > the wizard, I get the following text at the top of the screen: > > "block in log quick on ng0 proto udp from any port = 67 to > 192.168.100.0/24 port = 68 label "allow dhcp client out wan" Warning: > Cannot modify header information - headers already sent by (output > started at /etc/inc/filter.inc:1431) in /usr/local/www/wizard.php(89) : > eval()'d code on line 1" > > > Then, inside the wizard window it says: > > "Either your LAN or WAN interface doesn't support ALTQ. The wizard > cannot continue." > > > > I apologize for the late response on the 0.93 PPPoE items. I'll do my > > best to describe my issue when I upgraded. I do not have a ton of > > specifics, but I'll do my best and fetch anything extra that is needed. > > > > When I upgraded t0 0.93, upon reboot, my machine was not connected to > > the internet and I had an error with the ng0 interface that was not > > allowing it to connect. I believe the error was that the interface did > > not exist. > > > > To fix this issue, I ended up going in to the configuration of the WAN > > interface and changing it to DHCP and then back to PPPoE and it then > > connected and has been working fine. > > > > The same thing happened today when I came to the office. I was > > connected to my network last night from home and the connection was up > > and all was well. But, today when I came in, the interfaces page showed > > the connection was up with an IP. I could connect to the LAN side of > > pfSense no problem, but could not get out of the LAN to the internet > > from either a PC on the LAN or from pfSense itself (with the ping util). > > I ended up doing the same thing as the other day and switching my > > connection to DHCP and then back to PPPoE. I tried to force the PPPoE > > connection down from the interfaces page and it never seemed to go down. > > I rebooted my DSL modem and then rebooted pfSense and still nothing. > > After the reboot, on the interfaces page it showed: > > > > Status - Down > > PPPoE - Up > > > > But gave no info about MAC, IP, Subnet, etc. Only Status and PPPoE were > > showing. > > > > This is probably already known, but in case it is not, the shaper does > > not work with my connection. I get an error saying that ALTQ is not > > supported on ng0. My intent is not to gripe about shaping on PPPoE, I > > just wanted to make it known in case there had been work done in this > > area and it was thought to be working. Since it looks like we can > > choose the interface to shape on (I left the defaults in there when I > > ran the wizard), can I shape on the LAN for now and get any shaping > > until shaping on PPPoE works? Just curious. > > > > If you need any log info, etc, just let me know. > > > > It should also be known I am on the 0.93 version that came out > > originally. I believe there was another version created after that. Not > > sure if the changes between my version and that one matter, but I wanted > > to note that too. > > > > Thanks, > > Brian > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
