Got it! Didn't go all the way through the pfSense setup, as I thought the HD install would be before that point...
Cheers, Steve Pritchard -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: November 21, 2005 1:09 PM To: [email protected] Subject: Re: [pfSense Support] Install issue Option 99 from the pfSense console menu. On 11/21/05, Systems Administrator <[EMAIL PROTECTED]> wrote: > > I'm attempting to install pfSense 0.94.4 on an old SGI 1200 Dual P3 > 700, 2GB ECC RAM, 9GB SCSI drive on an AIC 7896 controller. The > hardware is recognized by BSD on CD boot, yet there is no install > option on the menu. I've tried selecting the console, and using the > info from the Wiki, FAQ, and install notes, but to no avail. > > As far as I can tell all hardware is in the BSD accepted hardware > list, and the disk is recognized as Disk 1 at boot. > > Any ideas would be appreciated as I would really like to test pfSense > in our environment! > > thanks, > > Steve Pritchard --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
