0.95a verified working on DynDns (custom) with the steps below. Thanks
so much Scott!

-----Original Message-----
From: Scott Ullrich [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, November 29, 2005 8:16 PM
To: [email protected]
Subject: Re: [pfSense Support] 0.95 DynDns Doesn't Work

Found the problem.   Perform the instructions I mentioned in the last
email, in addition to:

update_file.sh /etc/inc/dyndns.class


On 11/29/05, Scott Ullrich <[EMAIL PROTECTED]> wrote:
> That code is fine.   Thats only executed from the webgui.
>
> Remove the cache file in /cf/conf/dyndns.cache then trigger an update.
>
> Make sure your crontab is current:
>
> update_file.sh /etc/crontab
>
> Scott
>
>
>
>
> On 11/29/05, Frimmel, Ivan (ISS South Africa) <[EMAIL PROTECTED]>
wrote:
> >
> >
> > HI
> >
> > Ok so it still doesn't work.. I think it's the cache file.. Either 
> > it's not being updated or it shouldn't be trusted wherever it gets
its data from ?
> >
> > Nov 29 19:05:31 php: : phpDynDNS: No Change In My IP Address and/or 
> > 28 Days Has Not Past. Not Updating Dynamic DNS Entry.
> >
> > Nov 29 19:05:31 php: : DynDns: Cached IP: 165.165.202.222 Nov 29 
> > 19:05:31 php: : DynDns: Current WAN IP: 165.165.202.222 Nov 29 
> > 19:05:31 php: : DynDns: _detectChange() starting.
> > Nov 29 19:05:31 php: : DynDns: updatedns() starting Nov 29 19:05:31 
> > php: : DynDns: Running updatedns() Nov 29 19:05:28 php: : 
> > Informational: DHClient spawned /etc/rc.newwanip and the new ip is 
> > wan - 165.165.202.222.
> >
> > FRom DYNDNS:
> > frimmel.net 165.165.199.239  Thu Nov 24 10:48:45 2005
> >
> > I decided to take the plunge and delve into the depths ( or 
> > scratching the surface depends on perspective) ...
> >
> > I did spot this in services_dyndns, whether it has any relevance I 
> > don't
> > know:
> >
> >                 /* nuke the cache file */
> >                 config_lock();
> >                 services_dyndns_reset();
> >                 $retval = services_dyndns_configure();
> >                 $retval |= services_dnsupdate_process();
> >                 config_unlock();
> >                 $savemsg = get_std_save_message($retval);
> >
> > On line 5 after $retval, the pipe is something that concerns me .. I

> > am not familiar with PHP but it looks out of place?
> >
> > As you can see I have not had a working DynDns for more than a week 
> > since I came off 0.90a .. So I am determined to get this one nailed
..
> >
> > Tx
> > Ivan.
> >
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to