Scott Ullrich wrote: > Nothing really has changed to cause this. My tunnels are up fine. > > Scott >
Same on 0.96.2 on wrap: Dec 13 10:00:50 racoon: DEBUG: msg 1 not interesting Dec 13 10:00:49 racoon: DEBUG: msg 1 not interesting Dec 13 10:00:35 racoon: DEBUG: pfkey X_SPDDUMP failed: No such file or directory Dec 13 10:00:35 racoon: DEBUG: get pfkey X_SPDDUMP message Dec 13 10:00:35 racoon: INFO: fe80::20d:b9ff:fe02:c49c%sis0[500] used as isakmp port (fd=15) Dec 13 10:00:35 racoon: INFO: 192.168.30.254[500] used as isakmp port (fd=14) Dec 13 10:00:35 racoon: INFO: fe80::20d:b9ff:fe02:c49d%sis1[500] used as isakmp port (fd=13) Dec 13 10:00:35 racoon: INFO: 127.0.0.1[500] used as isakmp port (fd=12) Dec 13 10:00:35 racoon: INFO: ::1[500] used as isakmp port (fd=11) Dec 13 10:00:35 racoon: INFO: fe80::1%lo0[500] used as isakmp port (fd=10) Dec 13 10:00:35 racoon: INFO: fe80::20d:b9ff:fe02:c49c%ng0[500] used as isakmp port (fd=9) Dec 13 10:00:35 racoon: INFO: 192.117.108.61[500] used as isakmp port (fd=8) Dec 13 10:00:35 racoon: DEBUG: 8 addrs are configured successfully Dec 13 10:00:35 racoon: DEBUG: configuring default isakmp port. Dec 13 10:00:35 racoon: DEBUG: my interface: xxx.xxx.xxx.xxx (ng0) Dec 13 10:00:35 racoon: DEBUG: my interface: fe80::20d:b9ff:fe02:c49c%ng0 (ng0) Dec 13 10:00:34 racoon: DEBUG: my interface: fe80::1%lo0 (lo0) Dec 13 10:00:34 racoon: DEBUG: my interface: ::1 (lo0) Dec 13 10:00:34 racoon: DEBUG: my interface: 127.0.0.1 (lo0) Dec 13 10:00:34 racoon: DEBUG: my interface: fe80::20d:b9ff:fe02:c49d%sis1 (sis1) Dec 13 10:00:34 racoon: DEBUG: my interface: 192.168.30.254 (sis0) Dec 13 10:00:34 racoon: DEBUG: my interface: fe80::20d:b9ff:fe02:c49c%sis0 (sis0) Dec 13 10:00:34 racoon: DEBUG: compression algorithm can not be checked because sadb message doesn't support it. Dec 13 10:00:34 racoon: DEBUG: hmac(modp1024) Dec 13 10:00:34 racoon: DEBUG: compression algorithm can not be checked because sadb message doesn't support it. Dec 13 10:00:34 racoon: DEBUG: compression algorithm can not be checked because sadb message doesn't support it. Dec 13 10:00:34 racoon: DEBUG: reading config file /var/etc/racoon.conf Dec 13 10:00:34 racoon: DEBUG: call pfkey_send_register for IPCOMP Dec 13 10:00:34 racoon: DEBUG: call pfkey_send_register for ESP Dec 13 10:00:34 racoon: DEBUG: call pfkey_send_register for AH Dec 13 10:00:34 racoon: INFO: @(#)This product linked OpenSSL 0.9.7e-p1 25 Oct 2004 (http://www.openssl.org/) Dec 13 10:00:34 racoon: INFO: @(#)ipsec-tools 0.6 (http://ipsec-tools.sourceforge.net) > On 12/11/05, Gil Freund <[EMAIL PROTECTED]> wrote: > >>Scott Ullrich wrote: >> >>>Nothing has changed so double check everything and reboot both endpoints. >>> >>>On 12/11/05, John Cianfarani <[EMAIL PROTECTED]> wrote: >>> >>> >>>> >>>> >>>> >>>>Was using Ipsec tunnels both standard and mobile clients in 94.10 with it >>>>working fine. >>>> >>>>After the upgrade to 95.8 (also tried 95.4) tunnels will no longer come up. >>>> >>>>I did notice that there is no SPD defined anymore, I don't know if that is a >>>>cosmetic issue or a no policies are actually being applied. >>>> >>>>But I found this in the the IPSec Log >>>> >>>> >>>> >>>>Dec 11 13:41:18 racoon: DEBUG: pfkey X_SPDDUMP failed: No such file or >>>>directory >>>> >>>>Dec 11 13:41:18 racoon: DEBUG: get pfkey X_SPDDUMP message >>>> >>>> >>>> >>>>As always if you need any moew logs/debug let me know. >> >>Same here. IPSEC tunnel failed in 05.4 (Pfsense<->Netscreen). Works fine in >>0.94.12 >> >> >>>> >>>> >>>> >>>> >>>>Thanks >>>> >>>>John >> >> >>--------------------------------------------------------------------- >>To unsubscribe, e-mail: [EMAIL PROTECTED] >>For additional commands, e-mail: [EMAIL PROTECTED] >> >> --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
