Scott Ullrich wrote:
Did you enable the serial console on VMWare dev edition?
I am not trying with VMWare dev edition. I am trying with Dev edition
(hd installed) and embedded image edition. Same results. (I have dev
edition in harddisk (secondary master) and a cf disk (primary master))
in same computer. I can boot from both. The cf disk has embedded edition
written using dd from the 0.96.4 image. VMWare is in a linux PC (The one
_from_ which I am trying to access serial console)
raj
On 12/21/05, Rajkumar S <[EMAIL PROTECTED]> wrote:
Hi,
I am having difficulty accessing serial console from my a PC running embedded
image from
my work PC. My work PC is running Linux. I have connected a serial cable from
the work pc
to pfsense PC. I test the serial cable by running echo and cat at two ends, ie
pfsense PC
running dev edition and my linux pc.
In pfSense:
# echo "test" > /dev/ttyd0
In Linux:
[EMAIL PROTECTED]:~$ cat /dev/ttyS0
test
So the serial cable is fine. Now I have put minicom at 9600 8/N/1 and when I
boot embedded
image, the pfSense pc stops at:
Loading /boot/defaults/loader.conf
|
I also tried Terra Term in windows as in tutorial and the results are the same.
I am stuck
here. Any one to hit me with a clue stick?
regards,
raj
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
