I've got some changes in beta2. Please test http://www.pfsense.com/~sullrich/pfSense-Full-Update-1.0-PREBETA2-BUG-VALIDATION-EDITION.tgz
If for some reason it is not working, follow this procedure: Boot up firewall, disable helper for interface in question. Try again. I've added FTPSESAME in hopes that it will catch the edge cases. All in all, I hate FTP. Scott On 1/3/06, Charles Sprickman <[EMAIL PROTECTED]> wrote: > Following up to myself... > > On Tue, 3 Jan 2006, Charles Sprickman wrote: > > > # ps -auxw|grep ftp > > proxy 551 0.0 0.4 1276 884 ?? Ss Sun10PM 0:00.78 > > /usr/local/sbin/pftpx -c 8021 -g 8021 192.168.0.254 > > Problem one, apparently pftpx isn't notified about LAN IP change, so it > still was doing something with the old LAN IP. > > > So I killed it and then tried to run it again with the same args, but with a > > different IP to bind to: > > > > # /usr/local/sbin/pftpx -c 8021 -g 8021 192.168.0.1 > > pftpx: bind failed: Can't assign requested address > > Apparently it tries to bind to the loopback (127.0.0.1). > > After some looking around for anything else listening on those ports and > not finding anything and then running pftpx with full debugging, I thought > I'd check out if anything odd was going on with the loopback: > > lo0: flags=8048<LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > > See anything interesting there? :) > > No IPv4 IP address. > > ifconfig'd lo0 with 127.0.0.1 and started pftpx and all is well. > > Any idea where my loopback went? > > Thanks, > > Charles > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
