This only works on the LiveCD version, not the full install.
On 1/11/06, Vivek Khera <[EMAIL PROTECTED]> wrote: > > On Jan 10, 2006, at 4:39 PM, Scott Ullrich wrote: > > > You need to plug in the device before it boots. > > naturally. and the boot dmesg shows it as detected: > > acd0: CDROM <SAMSUNG CD-ROM SC-148C/B105> at ata1-master UDMA33 > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 38138MB (78106624 sectors) RAID 1 (optimal) > SMP: AP CPU #1 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <VendorID USB Flash Drive %z!Y> Removable Direct Access SCSI-2 > device > da0: 1.000MB/s transfers > da0: 62MB (128640 512 byte sectors: 64H 32S/T 62C) > GEOM_LABEL: Label for provider da0s1 is msdosfs/PFSENSECON. > Trying to mount root from ufs:/dev/amrd0s2a > fxp0: link state changed to UP > > > > > > At any rate there is a bug in BETA1. Make sure you're using PREBETA2 > > from http://www.pfsense.com/~sullrich/ > > > > just upgraded to 1.0-PREBETA2-BUG-VALIDATION-EDITION3 and rebooted. > it doesn't show up as an option either. > > I'm guessing that /scripts/pfi is not being run or is failing > someohow. Manually, I can mount the device fine: > > # mount -t msdos /dev/da0s1 /mnt > # ls -la /mnt > total 18 > drwxr-xr-x 1 root wheel 16384 Dec 31 1979 . > drwxr-xr-x 22 root wheel 512 Jan 11 10:55 .. > # df > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/amrd0s2a 36761320 104048 33716368 0% / > devfs 1 1 0 100% /dev > /dev/da0s1 64150 4 64146 0% /mnt > # mount > /dev/amrd0s2a on / (ufs, local) > devfs on /dev (devfs, local) > /dev/da0s1 on /mnt (msdosfs, local) > > > so I umount it, and touch /var/db/pfi/capable_da0s1 and the option > shows up on the menu. however, selecting it gives me a "Error while > mounting da0s1." failure. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
