Bill Marquette wrote:
There's a couple hints here and there, but the blog has one post:
http://pfsense.blogspot.com/2005/04/note-about-soekris-4801s.html
I'd recommend upgrading to the latest soekris bios, you'll need to see
this though:
http://faq.pfsense.org/index.php?action=artikel&cat=2&id=28&artlang=en&highlight=soekris
--Bill
Thanks for the reply. I did upgrade to the latest BIOS, but I'm still
seeing the same "Boot error" message. This was previously running
m0n0wall on another CF card, so it should have been all set for booting
from flash. It is a larger (1GB) flash card - would the info on this
page apply to me?
http://wiki.pfsense.com/wikka.php?wakka=FlashHowTo
I suspect that I may not be loading the image correctly. When I mount
the flash card in a USB reader, it shows up as a 56MB UFS partiction
(49MB used), but there do not appear to be any files in the mounted
directory.
I noticed that there were soekris-specific pfsense images at one point -
are these no longer needed with the generic "embedded" image? Or would
loading an old one, and then upgrading from the web interface help?
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
