....oh, btw, I'm using aue-nics (usb 2.0) with my mini itx boards for a very long time for syncing settings. another evidence that usb is supported...
Holger > -----Original Message----- > From: Scott Ullrich [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 22, 2006 6:30 PM > To: [email protected] > Subject: Re: [pfSense Support] LEX Light system, USB Boot > > > I have no plans on changing our current behavior. Any time we mess > with this portion it ends up in a lot of breakage and grey hairs on my > head. > > I've got enough grey hairs for now, thanks. > > On 2/22/06, Holger Bauer <[EMAIL PROTECTED]> wrote: > > Hi Bao, > > > > it's not available yet as the installer doesn't work with > it. I'll talk to Dario if we can offer it as inofficial > unsupported download somewhere for now. But USB-Keyboards > work just fine with the plain live-cd. However you have to > replug the keyboard once it asks you for the vlans or is > booted up. It works after a hotplug event. If your solution > works without hotplug we should try to merge it in. > > > > Holger > > > > > -----Original Message----- > > > From: Bao C. Ha [mailto:[EMAIL PROTECTED] > > > Sent: Wednesday, February 22, 2006 5:48 PM > > > To: [email protected] > > > Subject: RE: [pfSense Support] LEX Light system, USB Boot > > > > > > > > > Hi Holger, > > > > > > Where is Dario's script? > > > > > > Once USB is enabled, it will boot from USB devices on the > > > OpenBrick-E, which is similar to the Lex Light CV860A3R53. > > > > > > Bao > > > > > > On Wed, February 22, 2006 3:13 am, Holger Bauer wrote: > > > > That's not correct, at least not for newer versions. > I'm setting up > > > > nexcoms with usb keyboards and I have an experimental > > > live-usb-stick that > > > > was generated by a script from Dario to convert the livecd > > > to run from > > > > usbstick with custom config.xml which boots up at the > > > nexcom fine. Don't > > > > have a system like the LEX here to test but I guess it > > > should work with > > > > that as well. The installer is not prepared for the usb > > > drive, that's why > > > > you can't install from the stick to hdd but it would make a > > > great tool for > > > > rapid desasterrecovery or deployment of systems with custom > > > config as you > > > > even can specify a custom factory default config.xml with > > > Dario's script. > > > > > > > > Holger > > > > > > > >> -----Original Message----- > > > >> From: Bao C. Ha [mailto:[EMAIL PROTECTED] > > > >> Sent: Wednesday, February 22, 2006 4:17 AM > > > >> To: [email protected] > > > >> Subject: Re: [pfSense Support] LEX Light system, USB Boot > > > >> > > > >> > > > >> Hi Josh, > > > >> > > > >> It does not work because, by default, pfSense does not have > > > >> USB support enabled in the kernel. I have enabled USB so I > > > >> can boot pfSense on Hacom's systems from USB flash drives, > > > >> as well as to be able to use USB keyboard and mouse. > > > >> > > > >> Bao > > > >> > > > >> On Tue, February 21, 2006 5:50 pm, Josh Stompro wrote: > > > >> > I haven't been able to get my LEX Light mini pc to boot > > > with a USB > > > >> > cd-rom drive. > > > >> > It is the CV860A-3R53 model, 533Mhz, with 3 RealTek NIC's. > > > >> > > > > >> > I have tried LiveCD-1.0BETA1 and > > > >> > 1.0-BETA1-TESTING-SNAPSHOT-2-19-06 > > > >> > > > > >> > and they both get to this point and lock up. > > > >> > > > > >> >>> > > > >> > FreeBSD/i386 bootstrap loader, Revision 1.1 > > > >> > ([EMAIL PROTECTED], Sun Feb 19 19:28:43 UTC 2006) > > > >> > | > > > >> >>> > > > >> > > > > >> > I am not totally sunk yet, I can still use the onboard ide > > > >> connector to > > > >> > boot, but this would be much more convenient. > > > >> > > > > >> > Knoppix will boot via the USB drive, so I believe the > > > >> hardware is sound. > > > >> > > > > >> > Thanks > > > >> > Josh > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > --------------------------------------------------------------------- > > > >> > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > >> > For additional commands, e-mail: [EMAIL PROTECTED] > > > >> > > > > >> > > > > >> > > > >> > > > >> -- > > > >> Best Regards. > > > >> Bao C. Ha > > > >> Hacom OpenBrick Distributor USA http://www.hacom.net > > > >> voice: (714) 530-8817 fax: (714) 530-8818 > > > >> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 > > > >> > > > >> > > > >> > > > > --------------------------------------------------------------------- > > > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > > > >> For additional commands, e-mail: [EMAIL PROTECTED] > > > >> > > > >> > > > > > > > > ____________ > > > > Virus checked by G DATA AntiVirusKit > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > -- > > > Best Regards. > > > Bao C. Ha > > > Hacom OpenBrick Distributor USA http://www.hacom.net > > > voice: (714) 530-8817 fax: (714) 530-8818 > > > 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > ____________ > > Virus checked by G DATA AntiVirusKit > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
