I will retest with Beta2.  I had the same results that John reported
with Vonage lines.  I only had to test it with one of the lines.

Robert

On Sat, 2006-02-25 at 17:18 -0600, Bill Marquette wrote:
> Thanks for the update.  I just spent a number of hours on the shaper
> and think I found the problem.  This does appear to be an OS level bug
> but I've sort of worked around it in our config.  Beta 2 is just
> around the corner, the fixes, which require the wizard to be re-run
> (I've enforced this for those upgrading), will show up there (or if
> anyones willing to apply a patch -
> http://www.pfsense.com/~billm/20060225-shaper-fixes.diff - requires
> re-running of wizard and possible reboot).  I removed the upperlimit
> setting from the wizard - it's still available in the UI for those
> that wish to break their config as I'm hoping we'll get some
> resolution from the FreeBSD side on this soon.
> 
> --Bill
> 
> On 2/25/06, John Cianfarani <[EMAIL PROTECTED]> wrote:
> >
> >
> >
> > Finally got around to testing the shaper again today with VoIP on snapshot
> > 02-19-06.
> >
> >
> >
> > Tried several things but I could not make it work.
> >
> >
> >
> > Setup is as follows:
> >
> > 4mbit/800kb cable modem, nothing else connected but a wrap pfsense and 1
> > phone.
> >
> > Phone is using SIP to connect to a remote asterisk box in a colo center
> > codec is g711.
> >
> >
> >
> > Inside: LAN
> >
> > Download: 4000
> >
> > Outside: WAN
> >
> > Upload: 600 (was a little more conservative with this number)
> >
> > Check prioritize voice, type = asterisk and allotted BW of 256Kbits.
> >
> > Nothing else selected just next to the end.
> >
> >
> >
> >
> >
> > Tested a fews calls just to the asterisk box (like voice mail) and the voice
> > stutters several times a second.  After a few calls after about 5-8secs it
> > would clear up for maybe 2seconds and then resume stutter.  This is a the
> > same issue I've seen all my tests of the traffic shaper in the past.
> >
> > Watching the traffic queue screen during a call shows the qVOIPup and
> > qVOIPDown queues with about 15kb or so each and the drops just keep counting
> > higher.  The qlandef  and qwandef both show small amount of traffic of a few
> > 1-2 kb a sec and no drops.  All other queues show 0 traffic and 0 drops.
> >
> > If I turn off the shaper the voice is perfect again.
> >
> >
> >
> > If you need any more information just ask.  I can probably even setup a
> > temporary asterisk box if you need to connect to test stuff out.
> >
> >
> >
> > Thanks
> >
> > John Cianfarani
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to