|
Have
you tried installing with and without packet mode? I have to use this at the
nexcom and my via c3s to make them boot.
Holger
Scott, I sent you the installer.log from
an attempted install of Beta2 and 02-19-06. I just tried to boot with
Beta2 after doing a hard drive install and it just stops at the bootstrap
loader screen saying "Can't Load 'kernel'. I am going to keep using
02-19-06.
Thanks
Josh
Scott Ullrich wrote:
Yes, please email me /tmp/installer.log to [EMAIL PROTECTED]
Thanks!
On 3/1/06, Josh Stompro <[EMAIL PROTECTED]> wrote:
I have had luck getting my Lex box to work with
1.0-BETA1-TESTING-SNAPSHOT-2-19-06/pfSense.iso.gz. I booted with an ide
cdrom drive.
While installing to a hard drive the installer stopped with several
errors having to do with fdisk and the number of cylinders. I can
provide the install log if this isn't a known problem. I just skipped
the errors and was able to install just fine.
I was able to upgrade to
http://www.pfsense.com/~sullrich/1.0-BETA1-TESTING-SNAPSHOT-2-20-06/pfSense-Full-Update-TESTING-S
NAPSHOT-02-20-06.tgz
via the firmware upgrade method.
Everything appears ok so far.
Josh
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
--
Josh Stompro | Office 218.233.3757 EXT-139
LARL Network Coordinator | Mobile 701.371.3857
____________
Virus checked by G DATA AntiVirusKit
|
