Try a FreeBSD 6 release canidate CD and see if it is detected there. If it is not detected then you need to open a pr or ask the FreeBSD lists.
On 3/14/06, Matthew Fremont <[EMAIL PROTECTED]> wrote: > I'm having trouble getting pfSense to detect my 3054 MP+ Atheros > (AR5212, RF5112) miniPCI card on a WRAP 1E. > > I've tried both Embedded-1.0 BETA 1 and BETA 2 with no success. > > Here are the boot messages for BETA 1: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-STABLE #0: Mon Dec 26 01:07:09 UTC 2005 > [EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Geode(TM) Integrated Processor by National Semi (266.62-MHz > 586-class CPU) > Origin = "Geode by NSC" Id = 0x540 Stepping = 0 > Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX> > real memory = 134217728 (128 MB) > avail memory = 121909248 (116 MB) > wlan: mac acl policy registered > ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, > RF5413, DFS) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pci0: <network> at device 13.0 (no driver attached) > sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x1000-0x10ff mem > 0x80040000-0x80040fff irq 10 at device 14.0 on pci0 > sis0: Silicon Revision: DP83816A > miibus0: <MII bus> on sis0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis0: Ethernet address: 00:0d:b9:02:74:0c > sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0x1400-0x14ff mem > 0x80080000-0x80080fff irq 9 at device 15.0 on pci0 > sis1: Silicon Revision: DP83816A > miibus1: <MII bus> on sis1 > ukphy1: <Generic IEEE 802.3u media interface> on miibus1 > ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis1: Ethernet address: 00:0d:b9:02:74:0d > sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0x1800-0x18ff mem > 0x800c0000-0x800c0fff irq 11 at device 16.0 on pci0 > sis2: Silicon Revision: DP83816A > miibus2: <MII bus> on sis2 > ukphy2: <Generic IEEE 802.3u media interface> on miibus2 > ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis2: Ethernet address: 00:0d:b9:02:74:0e > Geode GPIO@ = f400 > Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005 > isab0: <PCI-ISA bridge> port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 > on pci0 > isa0: <ISA bus> on isab0 > pci0: <bridge> at device 18.1 (no driver attached) > atapci0: <National Geode SC1100 ATA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <multimedia, audio> at device 18.3 (no driver attached) > Geode CBA@ 0x9000 > Geode rev: 06 03 > Timecounter "Geode" frequency 27000000 Hz quality 1000 > pci0: <bridge> at device 18.5 (no driver attached) > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xe0000-0xe7fff on isa0 > ppc0: parallel port not found. > sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0 > sio0: type 16550A, console > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > RTC BIOS diagnostic error 80<clock_battery> > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad0: FAILURE - SETFEATURES SET TRANSFER MODE status=51<READY,DSC,ERROR> > error=4<ABORTED> > ad0: 122MB <SanDisk SDCFB-128 Vdg 8.18> at ata0-master BIOSPIO > GEOM_LABEL: Label for provider ad0a is ufs/pfSense. > GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg. > Trying to mount root from ufs:/dev/ufs/pfSense > > ___ > ___/ f \ > / p \___/ Sense > \___/ \ > \___/ > > Welcome to pfSense 1.0-BETA1 on the 'embedded' platform... > > > Here are the boot messages for BETA 2: > > Booting [/boot/kernel/kernel]... > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-PRERELEASE #0: Thu Mar 2 22:07:36 UTC 2006 > [EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Geode(TM) Integrated Processor by National Semi (266.63-MHz > 586-class CPU) > Origin = "Geode by NSC" Id = 0x540 Stepping = 0 > Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX> > real memory = 134217728 (128 MB) > avail memory = 121913344 (116 MB) > wlan: mac acl policy registered > ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pci0: <network> at device 13.0 (no driver attached) > sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x1000-0x10ff mem > 0x80040000-0x80040fff irq 10 at device 14.0 on pci0 > sis0: Silicon Revision: DP83816A > miibus0: <MII bus> on sis0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis0: Ethernet address: 00:0d:b9:02:74:0c > sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0x1400-0x14ff mem > 0x80080000-0x80080fff irq 9 at device 15.0 on pci0 > sis1: Silicon Revision: DP83816A > miibus1: <MII bus> on sis1 > ukphy1: <Generic IEEE 802.3u media interface> on miibus1 > ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis1: Ethernet address: 00:0d:b9:02:74:0d > sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0x1800-0x18ff mem > 0x800c0000-0x800c0fff irq 11 at device 16.0 on pci0 > sis2: Silicon Revision: DP83816A > miibus2: <MII bus> on sis2 > ukphy2: <Generic IEEE 802.3u media interface> on miibus2 > ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > sis2: Ethernet address: 00:0d:b9:02:74:0e > Geode GPIO@ = f400 > Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005 > isab0: <PCI-ISA bridge> port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 > on pci0 > isa0: <ISA bus> on isab0 > pci0: <bridge> at device 18.1 (no driver attached) > atapci0: <National Geode SC1100 ATA33 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <multimedia, audio> at device 18.3 (no driver attached) > Geode CBA@ 0x9000 > Geode rev: 06 03 > Timecounter "Geode" frequency 27000000 Hz quality 1000 > pci0: <bridge> at device 18.5 (no driver attached) > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xe0000-0xe7fff on isa0 > ppc0: parallel port not found. > sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0 > sio0: type 16550A, console > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > RTC BIOS diagnostic error 80<clock_battery> > Timecounters tick every 10.000 msec > Fast IPsec: Initialized Security Association Processing. > ad0: FAILURE - SETFEATURES SET TRANSFER MODE status=51<READY,DSC,ERROR> > error=4<ABORTED> > ad0: 122MB <SanDisk SDCFB-128 Vdg 8.18> at ata0-master BIOSPIO > GEOM_LABEL: Label for provider ad0a is ufs/pfSense. > GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg. > Trying to mount root from ufs:/dev/ufs/pfSense > > ___ > ___/ f \ > / p \___/ Sense > \___/ \ > \___/ > > Welcome to pfSense BETA-2 on the 'embedded' platform... > > > Has anyone had an success getting this card to work with a recent > version of pfSense? > > > Matthew > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
