beta1 is almost 3 month old!!! reinstall beta2 and try again. I suggest using the latest snapshot: http://pfsense.com/~sullrich/RELENG_1_SNAPSHOT_03-19-2006/pfSense.img.gz
Holger > -----Original Message----- > From: Anders D. Hansen [mailto:[EMAIL PROTECTED] > Sent: Thursday, March 23, 2006 9:21 AM > To: [email protected] > Subject: [pfSense Support] beta1 enable polling > > > Hi list, > > Running Beta1 on Soekris net4801. > > I tried to enable polling through the webinterface on BETA1 > and found > out that it might not have been implemented yet. > The soekris net4801 could only do about 22 Mbit/s of throughput and > there was no sign of any kern.polling.* sysctl's in /etc/sysctl.conf > > So to enable polling without upgrading to Beta2 or other special > hacks should I add the following to /etc/sysctl.conf and reboot? > > kern.polling.burst_max=1000 > kern.polling.each_burst=120 > kern.polling.idle_poll=1 > kern.polling.user_frac=5 > kern.polling.reg_frac=50 > kern.polling.enable=1 > > Thank you very much. > > Kind regards, > Anders > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > ____________ Virus checked by G DATA AntiVirusKit --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
