The BIOS sees the drive properly and the system can boot enough to start decompressing the kernel; the system that works sees this:
acd0: CDROM <LITE-ON CD-ROM LTN-489S/8DS2> at ata0-master UDMA33 ad4: 238418MB <WDC WD2500JS-75MHB0 03.01C03> at ata2-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a The current OS on the working box shows up as 6.1-PRERELEASE, the one that's dead is showing up as 6.0-RELEASE-p6. Both machines were installed about a month ago from CD, and have been upgraded using the cvs script.. The part that has me confused now, is I can't reinstall as it's not seeing the hard drive, as is freebsd6 boot cd.. Any advice? On Wed, 2006-04-05 at 14:42 -0400, Scott Ullrich wrote: > Nothing has changed. > > On 4/5/06, Derrick MacPherson <[EMAIL PROTECTED]> wrote: > > So I downloaded the latest version, boot the CD, and when I go to > > install to the hdd, it doesn't see it. Nothings changed on the system in > > regards to hardware, the BIOS sees the drive (SATA), so I'm wondering > > what might have changed on the OS side to cause this? > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
