This commit addressed that: http://cvstrac.pfsense.com/chngview?cn=11412
Very strange. If this is a issue still, please reopen the ticket and include as much information as possible. Thanks! On 4/18/06, Josh <[EMAIL PROTECTED]> wrote: > Ok thanks to Bill's suggestions I have everything fixed and working ok. It > seems that Beta3 decided to lookup rules that should have been disabled that > I had on my PPtP interface which was and had been for sometime completly > disabled. I temp enabled the PPtP interface again and deleted all the rules > under this interface. Once these rules were gone things started working as > they should. > > So now that this is behind me, everything appears great for my load > balancing setup. > > Thanks for the help Bill... > -Josh > > > > > Bill thanks for the help and > > > On 4/18/06, Bill Marquette <[EMAIL PROTECTED]> wrote: > > The slbd errors can be safely ignored for WAN load balancing - I've > > replied that elsewhere (forum I believe) and will be cleaning up those > > info messages for RC1. I'll need a copy of your /tmp/rules.debug, > > /var/etc/slbd.conf, and /conf/config.xml and a netstat -rn output > > would be useful to determine your routing table. > > > > Thanks > > > > --Bill > > > > On 4/18/06, Josh <[EMAIL PROTECTED]> wrote: > > > > > > It appears that upgrading to beta3 has killed my load balancing. I > originally had the monitor IPs the same for both gateways but have since > corrected that. I am using the gateway on both interfaces as the monitor IP. > With the failed load balancing I have also started to notice a failed > message appearing in my logs. > > > > > > This is from my Load Balance Log section > > > > > > Apr 18 11:12:28 slbd[2134]: Service changed status, reloading filter > policy > > > Apr 18 11:12:28 slbd[2134]: Switching to sitedown for VIP 127.0.0.1:666 > > > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 68.x.x.x:666 in > default (Operation now in progress) (IP= WAN Gateway) > > > > > > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 66.x.x.xx:666 > in default (Operation now in progress) (IP=OPT1 Gateway) > > > > > > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 added real service > 68.x.x.x:666 (IP= WAN Gateway) > > > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 added real service > 66.x.x.x:666 (IP=OPT1 Gateway) > > > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 sitedown at 127.0.0.1:666 > > > Apr 18 11:12:28 slbd[2134]: VIP 127.0.0.1:666 configured as "127.0.0.1" > > > Apr 18 11:12:28 slbd[2134]: Using configuration file /var/etc/slbd.conf > > > Apr 18 11:12:28 slbd[2134]: Using r_refresh of 5000 milliseconds > > > > > > > > > This is the log under system > > > > > > > > > Apr 18 11:12:39 php: : There were error(s) loading the rules: > /tmp/rules.debug:220: syntax error pfctl: Syntax error in config file: pf > rules not loaded - The line in question reads [220]: label "USER_RULE" > > > Apr 18 11:12:33 php: : FTP proxy disabled for interface opt1 - > ignoring. > > > Apr 18 11:12:28 slbd[2134]: Service changed status, reloading filter > policy > > > Apr 18 11:12:28 slbd[2134]: Switching to sitedown for VIP 127.0.0.1:666 > > > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 68.x.x.x:666 in > default (Operation now in progress) (IP= WAN Gateway) > > > Apr 18 11:12:28 slbd[2134]: TCP poll failed to start to 66.x.x.x:666 in > default (Operation now in progress) (IP=OPT1 Gateway) > > > > > > > > > > > > Most of the above log entry's I pasted are 'new' as in I didn't see > these errors until after 2 reboots & recreating the load balanced rule from > scratch with the gateways as the monitor IPs. Before I recreated the load > balance rule and load balanced the only noticible error was. > > > : There were error(s) loading the rules: /tmp/rules.debug:220: syntax > error pfctl: Syntax error in config file: pf rules not loaded - The line in > question reads [220]: label "USER_RULE > > > > > > > > > Let me know of any suggestions you may have or if you need additional > information from me. > > > Wan interface = DHCP (with static gateway) > > > Opt1 interface = static > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
