Today I saw something very interesting in the System logs about this topic:

As you said I disabled the pptp at the pfsense and made some other rules 
manually for redirecting pptp to my local server.

Afterwards I tried to establish a pptp connection to another firewall again and 
I got the same error 619.

But this time I saw the following in the logs:

If      Source          Destination                     Proto
-----------------------------------------------------
LAN     10.1.2.1:1187   195.xx.xx.xx:1723       TCP
WAN     195.xx.xx.xx    10.1.1.10                       GRE     ->??
LAN     10.1.2.1                195.xx.xx.xx            GRE

10.1.2.1                -> my host
195.xx.xx.xx    -> remote Firewall
10.1.1.10               -> local server for pptp


Here are my rules at the pfsense:

NAT Rules:

If      Proto   Ext.port        NAT IP                  int.port
--------------------------------------------------------
WAN     TCP     1723    10.1.1.10                       1723
                                (ext.: xx.xx.xx.xx)
--------------------------------------------------------
WAN     GRE   *         10.1.1.10                       *
                                (ext.: xx.xx.xx.xx)


WAN Rules:

Proto   Source  Port    Destination     Port    Gateway
-------------------------------------------------
TCP     *               *       10.1.1.10       1723    *
-------------------------------------------------
GRE     *               *       10.1.1.10       *       *

I don't know if it the same effect or not.
What do you think?

Bernie



-----Ursprüngliche Nachricht-----
Von: Holger Bauer [mailto:[EMAIL PROTECTED] 
Gesendet: Dienstag, 18. April 2006 11:58
An: [email protected]
Betreff: RE: [pfSense Support] windows error 619 with pptp

Unfortunately yes: http://cvstrac.pfsense.com/tktview?tn=812,6
This is a very strange bug that is pretty hard to diagnose. Disabling PPTP at 
the pfSense you are natting through should temporarily fix the issue.

Holger
-----Original Message-----
From: Bernhard Ledermann [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 18, 2006 11:04 AM
To: [email protected]
Subject: [pfSense Support] windows error 619 with pptp


I'm trying to establish a pptp connection from my PC (Windows XP) in my office 
to another remote office.
After a while I get a Windows error message 619.
I am behind a pfSense firewall (BETA3) with NAT and the remote office is using 
a m0n0wall v1.22 which terminates the VPN connection. Is this a known issue?

____________
Virus checked by G DATA AntiVirusKit


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to