Re: [pfSense Support] Beta 3 on CF images

[jonathan gonzalez]

Hi Bao,








Thanks a lot.
Regards,

Jonathan

Bao C. Ha wrote:

if i understand fine your post i see you are telling the group you sell specialized "bricks" and you're posting the images for them. I think they are awesome but you don't have availabe a comparision between and also no refer to benchmarking. Why i tell this. Let me explain: i have 8 boxes running in parallel and i need to be sure that they support to be up and running in a 24x7x365 basis because some of them are 500 km far from my city and they are giving support to an ISP. Do you think your boxes are prepared to support this hard life?

Hello,


using grub as the boot loader.


1. IBM PC-compatible hardware (CF-IDE primary master). They
should be used if you put the compactflash on the CF-IDE
adapter on the primary IDE master. I have just built but not
tested these, since I don't have the hardware here.

http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-ad0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-ad0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-ad0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-ad0.img.gz

2. For Hacom/Lex hardware which boot the CF from the secondary master
drive.

http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-ad2.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-ad2.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-ad2.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-ad2.img.gz

3. For USB flash drive,

http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-128-da0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-256-da0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-512-da0.img.gz
http://shopping.hacom.net/catalog/pub/pfsense/pfSense-1.0-BETA3-1gb-da0.img.gz

To install them, just do
zcat pfSense-1.0-BETA3-256-ad0.img.gz | dd of=/dev/da0 bs=16k

Just let me know if there are problems.

Thanks.
Bao

I have put pfSense images on CF for from the pc hardware with a CF-IDE adapter, our Hacom/Lex hardware or the USB flash drive, These images in the past can be upgraded with the "emrbedded" updates. However, for Beta 3, there is no embedded update image for "embedded" platform, of which these hardware are pretend to be.

signature.asc
Description: OpenPGP digital signature