Citat Craig Roy <[EMAIL PROTECTED]>: > Have you been able to install PFSense on that machine at all ever? As it > sound more like a hardware issue or incompatibility with something in your > hardware arrangement.
The computer is new and pfSense is the first thing I'm trying to install on it. > However, it is not uncommon to have new RAM fail out of the box. I have > experienced that before. It will at least confirm that you have known good > RAM. As I said I have two new ram blocks, so the chance of there being an error on both is very small. Also please remember that FreeBSD 6.1 RC1 runs perfectly. > What other Hardware is in your system and brands and chipsets etc, so that > anyone else may have an idea if it is an incompatibility problem that you > may be experiencing. So then be able to give you some sound advice. CPU: Intel Celeron D 336, 2.80 GHz, 533 MHz, 775pin Motherboard: Asus P5P800 SE Ram: Kingston DDR PC3200, 400 MHz, CL2.5, 256 MB Harddisk: Maxtor DM 10, 80 GB, 7200 rpm, 8 MB, SATA II NIC's: Intel PRO/1000 GT Desktop Adapter, Bulk > Does it appear to be doing a memory dump and unloading or is it continuing > to load? I have no idea. Looks like machinecode and could be a memory dump. > What happens after you see the hex, does it eventually reboot by > itself or just hang? It just keeps going, but I don't know what will happen if I let it run like that for hours. br db --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
