Its technically compiled now for this.  It just lacks a little glue to
get it working.

I'll get this going now.  It'll be in the next beta.

Scott

On 4/27/06, rabbtux rabbtux <[EMAIL PROTECTED]> wrote:
> How difficult would it be to compile the kernel with the SC1100
> watchtog module?  I think thats the one used on the WRAP boards.  I
> really want to use pfsense, but on remote systems it should never go
> 'dark' just burp from the dog.
>
> On 4/27/06, Scott Ullrich <[EMAIL PROTECTED]> wrote:
> > Thats very strange.  I have 2 WRAPs at home that have been running
> > solid since beta3 was released.
> >
> > On 4/27/06, rabbtux rabbtux <[EMAIL PROTECTED]> wrote:
> > > The test system is a WRAP 2c.  It has 128M of ram, 2 ethernet nics.  I
> > > plugged in an MP2111 mini pci 802.11b radio into the board.  This was
> > > necessary so that I could assign the 2 nics to LAN and OPT for
> > > bridging.  The radio was unconfigured and assigned to WAN.
> > >
> > > On 4/27/06, Scott Ullrich <[EMAIL PROTECTED]> wrote:
> > > > Ouch.  That's not good.  Can you describe the hardware itself?  What
> > > > components are in it, chipsets, etc?
> > > >
> > > > On 4/27/06, rabbtux rabbtux <[EMAIL PROTECTED]> wrote:
> > > > > All,
> > > > >
> > > > > Have been trying to upgrade our AP systems from a pebble based system
> > > > > to something newer and stable.  Just finshed a several day trial of a
> > > > > newer m0n0wall based distro called pfsense.  Loved advanced FW and
> > > > > traffic shaping available.  Configured simple bridge & shaper and put
> > > > > it inline with our system.  Great voip response, less delay due to
> > > > > priority DNS, etc.  On the 128M wrap board I used it went 2 days+ then
> > > > > locked up.  (it was running 500Kb/s to 1Mb/s during the trial)
> > > > >
> > > > > The wrap board has a watchdog timer, does pfsense use it?  If not,
> > > > > can it be added.  I'm a linux guy with no BSD experience, but
> > > > > offerings like m0n0wall and pfsense are tempting me to look deeper :-)
> > > > >
> > > > > ---------------------------------------------------------------------
> > > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > > >
> > > > >
> > > >
> > > > ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > > For additional commands, e-mail: [EMAIL PROTECTED]
> > > >
> > > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > > For additional commands, e-mail: [EMAIL PROTECTED]
> > >
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to