Dear Support
I have installed Beta 3 as a firewall/router
WAN is on a p2p address /30
LAN is on a private network for configuration only
DMZ is on a /28
Traffic inbound from the WAN to DMZ works fine, However I am unable to
connect to the Internet from the DMZ through the WAN interface.
I am also unable to ping the DMZ’s interface address, so I naturally
thought it was a rule issue. I set a rule to Allow all from any address on both
the WAN and DMZ interfaces.
However I was still not able to ping the DMZ interface address.
I then decided to disable the Firewall in the advanced settings and
found I could ping the interface address on the DMZ, in addition I also found
that the routing was now working and that I was able to connect to the Internet.
I think there might be an issue with the Optional Interfaces and the
Firewall rules.
I would be most grateful for any help you can give me.
Yours sincerely
Trevor Burt
