Thanks for the (very) prompt response Chris. :o) Much appreciated. By any chance do you have any links or info as to if, and if so when, altq will support the tl(4) driver ?
-----Original Message----- From: Chris Buechler [mailto:[EMAIL PROTECTED] Sent: Friday, 26 May 2006 10:07 PM To: [email protected] Subject: Re: [pfSense Support] FW: Traffic shaping and the Compaq Netelligent Dual cards Michael Eales wrote: > Ethernet card is the Compaq Netelligent Dual 10/100 ethernet (Spares Number: > 242560-001) > Pfsense is using the tl(4) -- Texas Instruments ThunderLAN Ethernet device > driver. > From 'man 4 altq': SUPPORTED DEVICES The driver modifications described in altq(9) are required to use a cer- tain network card with ALTQ. They have been applied to the following hardware drivers: an(4), ath(4), awi(4), bfe(4), bge(4), dc(4), de(4), ed(4), em(4), fxp(4), hme(4), lnc(4), re(4), rl(4), sf(4), sis(4), sk(4), ste(4), vr(4), wi(4), and xl(4). So no, the tl(4) driver is not supported by ALTQ at this time, and hence not by the pfsense traffic shaper. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
