[pfSense Support] PPTP clients can't see bridged OPT clients

[Nathan Osborne]

Hi everyone,

I am having trouble getting PPTP clients to see clients on my OPT1 network.  I have BETA 4 installed with OPT1 bridged to LAN.  WAN is configured with a static IP connected to a DSL modem.  I'm running the PPTP server on the WAN IP. Clients are able to log in to PPTP VPN fine and can ping and connect to everything on the LAN.  Local LAN and OPT clients can see each other (ping, smb shares) in both directions.  But the remote PPTP clients are not able to ping or connect to smb shares on the OPT net. I've tried this with filtering bridge enabled and disabled--either way I don't see any relevant block rules in the Firewall system log.  I'm not using traffic shaping.  I've set the MTU on WAN, OPT and all PPTP clients to 1430.  Can someone help set me straight?  Should this be possible?  I want PPTP clients to have full access to the LAN and the bridged OPT nets.

My PPTP rules:
* PPTP Clients * Lan Net * *
* PPTP Clients * OPT1 Subnet * *
* PPTP Clients * * * *

My OPT1 rules:
* OPT1 Net * Lan Net * *
* OPT1 Net * PPTP Clients * *
* OPT1 Net * * * *

My LAN rules:
* Lan Net * * * *

Thanks for your help,
Nate